decided on a purchasing a pro today. i was considering the premium but money is money and i haven't had a 3 flipper stern since sharkeys shootout. looking forward to a non typical shooter layout from stern this time around.
You're currently viewing posts by Pinsider ballsofsteel.
Click here to go back to viewing the entire thread.
decided on a purchasing a pro today. i was considering the premium but money is money and i haven't had a 3 flipper stern since sharkeys shootout. looking forward to a non typical shooter layout from stern this time around.
first stern i've ever had to pull an entire flipper assembly off to tighten a post on the pf (the problematic post under the upper right flipper).
Quoted from MrMikeman:You don't need to. A flat screwdriver held against the nut is usually enough to hold it while you tighten.
not on mine, they didn't even tighten the nut up really at all. Trust me i tried to use any tools available without pulling the base plate. nothing was thin enough to get a grip on it with the small gap between the mech base and the playfield. I had to use a a socket to make it up probably 5-10 full turns.
You're currently viewing posts by Pinsider ballsofsteel.
Click here to go back to viewing the entire thread.
Wanna join the discussion? Please sign in to reply to this topic.
Great to see you're enjoying Pinside! Did you know Pinside is able to run without any 3rd-party banners or ads, thanks to the support from our visitors? Please consider a donation to Pinside and get anext to your username to show for it! Or better yet, subscribe to Pinside+!
This page was printed from https://pinside.com/pinball/forum/topic/jurassic-park-stern-2019-owners-club-welcome-to-jurassic-park?tu=ballsofsteel and we tried optimising it for printing. Some page elements may have been deliberately hidden.
Scan the QR code on the left to jump to the URL this document was printed from.