Anyone on the west side of the United States looking to part with a Jurassic Park Premium or LE?
You're currently viewing posts by Pinsider GeekedOnPinball.
Click here to go back to viewing the entire thread.
Quoted from CoolCatPinball:Congrats on the purchase! My 2 cents worth is that all that together is a bit too busy. The games look pretty good right from Stern, and theres a few good mods out there like the realistic pteradon that add to the game.
Yeah I was already thinking I would not be installing the speaker stickers and the lockdown bar sticker and maybe the coin box stickers. Was just curious what the yellow caution type stickers looked like installed.
What brand of Dino models are people installing like the Pteradon? I see palms too is that a particular brand? Any links would be appreciated.
Quoted from Matesamo:I used generic palm trees from EBay that were for model train scenery. Here is my machine with the caution tape on the playfield frame and on the coin door. The dinosaurs were from Hobby Lobby and EBay.[quoted image][quoted image][quoted image][quoted image]
Thanks that helps, I like the yellow striping inside and the ramp decal a lot. Also ordered the same replacement signs you have and they look great in your game. Tilt makes some great graphics. Nice pimped out pro!
Fellow JP owners...
I just bought a JP prem that was manufactured in July 2020 so it has no paint near the posts. Is it still recommended to install the cliffy carbon fiber circles under all posts?
Any other big issues where I should install something for the game? I think I'm going to do mylar in the shooter lane unless the cliffy is better?
What about the raptor cage? Anything for here?
Does the outhole drain need one? Seems like it might wear bad there.
Hi Fellow JPers... how do I get the modded movie/sound package that people talk about for this pin? Can you use this on the latest code?
Quoted from CoolCatPinball:This is your coil stop The little round button in the center can become loose or even detached.
[quoted image]
I have a question about the coil stops... When the coil stop is just loose should I replace them or is it just indicative that they will probably fail soon? I have a couple on hand because I own six modern sterns and heard this is something that fails often. Does it hurt anything to leave them until they fail?
Quoted from TVsFrank:I never considered the wire being bent to be a big deal. I assume it was to look like the raptors have escaped and gotten through the wires like in the movie. I bent mine a little more and made an extra cut to make the effect stand out.
As said above, a dab of glue is all it takes for the sign, nothing to be stressed about.
Love the mezel mod raptor pen mod but its way better if you use uncoated picture hanging wire because you can shred it like the wire near the trex.
Also that last hook looks broken, its printed that way to look like it was broken out of...
64577579-C524-4682-837C-E23743AA8401 (resized).jpegQuoted from ProjektPat:That's what they told me when I emailed them but their pictures on their page have it unbroken
Yeah they changed the design later
Quoted from Jakers:Is this a common thing on the premiums? I swear this happens almost every day. Glass has to come off.
[quoted image]
I've never had that happen on my JP Premium, looks like you could just loosen the screws holding down the metal ramp and adjust it a bit away from copter blades.
I think it should just hit the big blades
You're currently viewing posts by Pinsider GeekedOnPinball.
Click here to go back to viewing the entire thread.
Wanna join the discussion? Please sign in to reply to this topic.
Great to see you're enjoying Pinside! Did you know Pinside is able to run without any 3rd-party banners or ads, thanks to the support from our visitors? Please consider a donation to Pinside and get anext to your username to show for it! Or better yet, subscribe to Pinside+!
This page was printed from https://pinside.com/pinball/forum/topic/jurassic-park-stern-2019-owners-club-welcome-to-jurassic-park?tu=GeekedOnPinball and we tried optimising it for printing. Some page elements may have been deliberately hidden.
Scan the QR code on the left to jump to the URL this document was printed from.