New! Dark mode!

Browsing Pinside at night? Getting tired of all the white? Switch to dark mode using the button in the top right (or CTRL-B)!

(Topic ID: 248582)

Jurassic Park (Stern 2019) Owners Club. Welcome! To Jurassic park.....


By Scribbles

1 year ago



Topic Stats

  • 8,330 posts
  • 723 Pinsiders participating
  • Latest reply 28 minutes ago by brickbuilder14
  • Topic is favorited by 358 Pinsiders

You

Linked Games

Topic Gallery

There have been 1,763 images uploaded to this topic. (View topic image gallery).

Screenshot_20201126-112329_Chrome (resized).jpg
2691351F-CBD4-40F0-9B76-16A12F10854B (resized).jpeg
IMG_4972 (resized).JPG
44E8BA11-9F0B-4AB5-9CBB-A5359788108A (resized).jpeg
15B7DB1D-4619-4FCD-899D-E3D79AA9F92E (resized).jpeg
93A2E4F2-7223-4DD6-BF12-0E4503B2C7B5 (resized).jpeg
can.gif
IMG_4970.JPG
IMG_4968.JPG
IMG_4964 (resized).JPG
1.gif
ef31b6a59efa44aef380b503f3e794555ceb0b36 (resized).jpeg
20201123_115632 (resized).jpg
20201123_115607 (resized).jpg
IMG_4929.JPG
1.gif

Topic index (key posts)

10 key posts have been marked in this topic (Show topic index)

There are 8330 posts in this topic. You are on page 87 of 167.
#4301 8 months ago
Quoted from Prodoshi:

AAAARRRGH!! 600 games, clearcoat is damaged at the upper flippers post.
The post was never loose, because i always checked it!
What can i do now? I payed over 9.000$ here in the EU.
How much will i loose if i want to resell it?
Build date = Dec. 17. 2019
Will i get a replaced, unpopulated PF?
And what can i do to minimize further damage? airgun, PVC washers?
[quoted image]

You can use a "Hard as Nails" Type Fingernail Clear as well.
After a layer or two,you can see if you add the black back, how it looks.
You can add a washer..., as well as printing a small sticker, etc to cover the
washer, if you want to go deeper.

#4302 8 months ago
Quoted from OLDPINGUY:

You can use a "Hard as Nails" Type Fingernail Clear as well.
After a layer or two,you can see if you add the black back, how it looks.
You can add a washer..., as well as printing a small sticker, etc to cover the
washer, if you want to go deeper.

Cliffy makes a great carbon fiber washer you can put there as well. I did that for my TNA where it chipped a little by a post.

#4303 8 months ago

Thanks for the advice. I will wait until I know how Stern and my distributor want to proceed.

#4304 8 months ago

My shaker motor developed a squeak tonight. Suddenly it started sounding like an old see-saw that needs oil. Anyone had this happen or know what to look at? I did the shaker motor test to confirm where the squeak is coming from and it's definitely coming from the shaker motor as it starts to slow down after firing.

#4305 8 months ago
Quoted from EaglePin:

My shaker motor developed a squeak tonight. Suddenly it started sounding like an old see-saw that needs oil. Anyone had this happen or know what to look at? I did the shaker motor test to confirm where the squeak is coming from and it's definitely coming from the shaker motor as it starts to slow down after firing.

Ohhhh, my.... that would drive me absolutely nuts!! But I can't help laughing! The sound running through my brain now

#4306 8 months ago
Quoted from Scribbles:

Ohhhh, my.... that would drive me absolutely nuts!! But I can't help laughing! The sound running through my brain now

Lol, yep it's like nails on a chalkboard - both literally and figuratively.

#4307 8 months ago
Quoted from EaglePin:

My shaker motor developed a squeak tonight. Suddenly it started sounding like an old see-saw that needs oil. Anyone had this happen or know what to look at? I did the shaker motor test to confirm where the squeak is coming from and it's definitely coming from the shaker motor as it starts to slow down after firing.

I've had this before. spraying the motor with contact cleaner seems to usually take care of it.

#4308 8 months ago

Anyone in the midwest have a HUO Jurassic Park Pro they would be interested in selling this weekend for cash? Apparently it only took 7 days of house lockdown for my wife to realize how much fun having a pin in our home could be. Hoping someone relatively local can help our family get our first pin. Shoot me a PM if you are interested in selling. Thanks in advance!

#4309 8 months ago
Quoted from Prodoshi:

AAAARRRGH!! 600 games, clearcoat is damaged at the upper flippers post.
The post was never loose, because i always checked it!
What can i do now? I payed over 9.000$ here in the EU.
How much will i loose if i want to resell it?
Build date = Dec. 17. 2019
Will i get a replaced, unpopulated PF?
And what can i do to minimize further damage? airgun, PVC washers?
[quoted image]

Same, with much less than 600 plays. Tell your distributor. They'll send you a clear touch up kit.

#4310 8 months ago
Quoted from kpg:

Cliffy makes a great carbon fiber washer you can put there as well. I did that for my TNA where it chipped a little by a post.

I thought so too, but my carbon fiber washer just keeps slipping down. I can't tighten the post any more either.

#4311 8 months ago

Is there any info about a stern Jp topper ?

#4312 8 months ago
Quoted from aobrien5:

...They'll send you a clear touch up kit.

thats a (bad) joke right !?

i still wanna get a JP, but...

#4313 8 months ago
Quoted from RipleYYY:

thats a (bad) joke right !?
i still wanna get a JP, but...

2020-03-21 10.31.38.jpg
#4314 8 months ago
Quoted from RipleYYY:

thats a (bad) joke right !?
i still wanna get a JP, but...

Think mostly a bad joke. My PF has zero issues.

#4315 8 months ago

oh dear...

but i have a bad memory, as in fact, i had clearcoat small probs on my NIB MET, with a same very small part where the coat was gone (was as it when just out of the box), in the shooterlane

and yes, now i remember, distro did propose me a similar repair kit... didnt took it, let it as it, never go badder, never was a prob

but than MET !!! it was 2013, sure we can found back talks about that here on PINSIDE, i was not the only one

#4316 8 months ago

September build date for my Pro. Has the thinner clear, pulled back artwork as you can see, and the improved post. Just noticed this today when I was cleaning the table...☹️

IMG_20200321_140035 (resized).jpg
#4317 8 months ago
Quoted from Thunderbird:

Think mostly a bad joke. My PF has zero issues.

No it’s not a joke, Stern sent these kits out to customers with various defects in clearcoat over the years.

And lucky you, plenty of people are having issues with their playfields, the old it’s not happened to me the problem doesn’t exist mentality helps no one.

#4318 8 months ago
Quoted from J85M:

No it’s not a joke, Stern sent these kits out to customers with various defects in clearcoat over the years.
And lucky you, plenty of people are having issues with their playfields, the old it’s not happened to me the problem doesn’t exist mentality helps no one.

Well agreed, as I’ve had issue on other machines.

#4319 8 months ago

Finally received my Stern JP shooter knob I ordered in August! Installation guide was mysteriously absent, any tips on where it plugs in to??

#4320 8 months ago
Quoted from Caviel:

September build date for my Pro. Has the thinner clear, pulled back artwork as you can see, and the improved post. Just noticed this today when I was cleaning the table...☹️[quoted image]

That's the alignment dot for the upper right flipper

#4321 8 months ago

The feb 2020 build date playfields look amazing!! Less clear and less dimpling on mine. Very happy so far. Game plays super fast!

#4322 8 months ago
15FAF901-35D3-4AAB-8D4E-BC853E7F1A4C (resized).jpeg
#4323 8 months ago

this is the advice from Stern beside contacting my ditributor:
----------------------------------
I would suggest asking your distributor for a hard coat kit # 502-6947-00 or you can use a polyurethane to lightly apply over the chip. This will prevent the chip from spreading.
----------------------------------

the hard coat kit is not listed in any shop i searched.

to prevent further damage i used this PETG washer. Worked well for another 200 games:
https://pu-parts.com/klare-petg-unterlegscheibe-3-4-zoll

the post sleeve you see is the perfectplay's "thin" post sleeve. Its similar to the sterns hard one, but in different colors and 1mm smaller.
that should cause less black dirt on the PF and maybe some shots are slightly easier now

20200322_094933 (resized).jpg
#4324 8 months ago

Anyone has flickering LEDs? This began after some days of play. Its the four LEDs under the inlane guides, left and right.
I cant tell what it is, the lights brightness seems to change when pushing against the LED itself, and its flickering hard when using a flipper. (vibration?)
And now the weird part, it slightly flickers when i push the flipper button and leave it in the up position.
Swaping LEDs does not help. And somehow the voltage seems to affect them too (hold flipper test).
I have had two mods installed, T-Rex ramp lights and a shaker. Removing them did not help.
I have the same problem with my Ghostbusters now and then.

#4325 8 months ago
Quoted from Prodoshi:

Anyone has flickering LEDs? This began after some days of play. Its the four LEDs under the inlane guides, left and right.
I cant tell what it is, the lights brightness seems to change when pushing against the LED itself, and its flickering hard when using a flipper. (vibration?)
And now the weird part, it slightly flickers when i push the flipper button and leave it in the up position.
Swaping LEDs does not help. And somehow the voltage seems to affect them too (hold flipper test).
I have had two mods installed, T-Rex ramp lights and a shaker. Removing them did not help.
I have the same problem with my Ghostbusters now and then.

I had the same, press together the socket where it holds the led and problem solved

#4326 8 months ago
Quoted from fooflighter:

That's the alignment dot for the upper right flipper

Three of them?

#4327 8 months ago

-edit-

#4328 8 months ago
Quoted from Caviel:

Three of them?

There should only be one there. It does look as if you have two less deep ones too

#4329 8 months ago

Here is mine

image (resized).jpg
#4330 8 months ago

I received the call on Friday; the dealer had the machine in-hand and ready for pickup. It was a nice drive yesterday; clear, crisp weather with very little traffic. Looks like the manufacture day was Thursday. The play-field looks beautiful. These machines are incredible. I'm very lucky and thankful to have it. The sounds, music and dino roars are simply awesome. Only have a few plays under my belt. now I feel like watching the JP films tonight. Time to clean the mess and work on a 2nd game-room.

JPpreArrival (resized).pngJPpre (resized).png
#4331 8 months ago
Quoted from Prodoshi:

Anyone has flickering LEDs? This began after some days of play. Its the four LEDs under the inlane guides, left and right.
I cant tell what it is, the lights brightness seems to change when pushing against the LED itself, and its flickering hard when using a flipper. (vibration?)
And now the weird part, it slightly flickers when i push the flipper button and leave it in the up position.
Swaping LEDs does not help. And somehow the voltage seems to affect them too (hold flipper test).
I have had two mods installed, T-Rex ramp lights and a shaker. Removing them did not help.
I have the same problem with my Ghostbusters now and then.

My Maiden does it also.

Strange it always seems to be the leds in the inlane guides?

#4332 8 months ago

It's not strange, it's the cheap sockets Stern uses. Been this way for years, just like their junk coil stops. Flipper vibration causes intermittent connectivity in the socket, thats why it's always the inlanes. Pull the LED and squish the socket a bit to make it tighter.

#4333 8 months ago
Quoted from metallik:

It's not strange, it's the cheap sockets Stern uses. Been this way for years, just like their junk coil stops. Flipper vibration causes intermittent connectivity in the socket, thats why it's always the inlanes. Pull the LED and squish the socket a bit to make it tighter.

my socket just broke

#4334 8 months ago

The newton ball came loose and now have a playfield chip. Its nearly hidden by the ball but would like to cover it somehow but dont want something too thick that will raise the ball/affect play. Any ideas to protect and hide this chip under the newton ball? I waa thinking some sort of thin washer. Thx!

#4335 8 months ago
Quoted from Caviel:

Three of them?

Ah sorry I see that now...I would fill it with a dab of automotive clearcoat, those 2 little spots will disappear

#4336 8 months ago

I picked one of these up a few weeks ago in a 4 pin package deal. (TNA, DP PRO, and Stranger Things)
It wasn't one that was on my radar at the time even though I had played it a couple dozen times.
It still took a while to grow on me but now that I have a 100+ games on it I can't quit playing it!

#4337 8 months ago
Quoted from Lilpro66:

I picked one of these up a few weeks ago in a 4 pin package deal. (TNA, DP PRO, and Stranger Things)
It wasn't one that was on my radar at the time even though I had played it a couple dozen times.
It still took a while to grow on me but now that I have a 100+ games on it I can't quit playing it!

That may be the best 4 pin package deal of all time, and I'm not even a huge TNA fan!

#4338 8 months ago

A friend of mine lost his routing space as the owners of the bar wanted to go in a different direction.
Funny thing is TNA was the only one I had been looking for. Mainly because I have a tight spot with low ceiling height.
Having a blast playing them all. Originally was going to route them with some of my other pins and then came Covid virus so this on hold for a while.

#4339 8 months ago

Is there a resource out there that outlines the rules/objectives of T-Rex, Raptor and Chaos multiball?

#4340 8 months ago
Quoted from jacksparrow0112:

Is there a resource out there that outlines the rules/objectives of T-Rex, Raptor and Chaos multiball?

Shoot the flashing lights, don't let the ball drain.

And then there's this, which is a little more comprehensive;
http://tiltforums.com/t/stern-jurassic-park-rulesheet-wip/

#4341 8 months ago

Just joined the club. Got the premium. Is the TRex supposed to spit the ball back on the ramp for a TRex event? Right now it drops it near the wire form but rarely on it

#4342 8 months ago
Quoted from nullPinner:

Shoot the flashing lights, don't let the ball drain.
And then there's this, which is a little more comprehensive;
http://tiltforums.com/t/stern-jurassic-park-rulesheet-wip/

This is perfect. Thanks!

#4343 8 months ago
Quoted from GrandFireball1:

Just joined the club. Got the premium. Is the TRex supposed to spit the ball back on the ramp for a TRex event? Right now it drops it near the wire form but rarely on it

The TREX will either drop the ball onto the wireforn or throw the ball, it depends on the TREX event you've started. If the TREX is dripping the ball on the wireforn but not successfully as you've described then you have an issue. The TREX left/right movement and range can be adjusted in the menu

#4344 8 months ago
Quoted from per3per3:

The TREX will either drop the ball onto the wireforn or throw the ball, it depends on the TREX event you've started. If the TREX is dripping the ball on the wireforn but not successfully as you've described then you have an issue. The TREX left/right movement and range can be adjusted in the menu

Ok thanks. Will take a look.

11
#4345 8 months ago

I made a new alternate translite for the data east game but liked it enough to format it for the stern game. Realizing the actors dont apply I also made a DINO only version with the Jeep.

JP STERN CAST PST (resized).jpgSTERN DINO ONLY JEEP PST (resized).jpgjp ON PREM (resized).jpgstern JP on PRO (resized).jpg
#4346 8 months ago
Quoted from Pinstein:

I made a new alternate translite for the data east game but liked it enough to format it for the stern game. Realizing the actors dont apply I also made a DINO only version with the Jeep.[quoted image][quoted image][quoted image][quoted image]

Nice job. Could you make a different background other than the caution tape?

#4347 8 months ago

It’s nice, but I would like to see one without the big logo

#4348 8 months ago
Quoted from Pinstein:

I made a new alternate translite for the data east game but liked it enough to format it for the stern game. Realizing the actors dont apply I also made a DINO only version with the Jeep.[quoted image][quoted image][quoted image][quoted image]

Perfect for all of you caution tapers.

#4349 8 months ago

I have a JP pro that the bumpers near the flippers only engage in test and not upon ball impact. Unable to open a support ticket due to the shutdown of Illinois business. If someone could give me some tips I would much appreciate it.
DA31BCD9-1400-4D4B-9B09-6BA9E887B193 (resized).jpeg

#4350 8 months ago

Just picked up a premium yesterday! Now to learn some rules. Love the shots, sounds, action. Great game.

Promoted items from the Pinside Marketplace
$ 51.45
Playfield - Toys/Add-ons
Lermods
$ 399.99
Cabinet - Toppers
Top-Notch Target Shields
$ 199.00
Gameroom - Decorations
Lit Frames
$ 12.50
Cabinet - Sound/Speakers
Gweem's Mods
There are 8330 posts in this topic. You are on page 87 of 167.

Hey there! Got a moment?

Great to see you're enjoying Pinside! Did you know Pinside is able to run thanks to donations from our visitors? Please donate to Pinside, support the site and get anext to your username to show for it! Donate to Pinside