Quoted from Spyderturbo007:Anyone have a fix for a truck that doesn't rotate correctly? It spins around just fine, but seems to get stuck about 1/4" away from the newton ball on both sides. Whack the side of the game or flip the flippers a few times and it settles in.
It's the one at leagues. I pulled it apart last night, cleaned the assembly and put a small bit of super lube on the ball bearing washer. It spins around better, but that last 1/4" is still an issue.
Make sure the flange on the end that the switch sensor reads is not interfering a getting hung up on the sensor. The truck assembly should a just a very small amount of play and the flange should clear the sensor by a couple millimeters..With the playfield up, put your hand on the truck to keep it flush to the playfield...you should be able to rotate it around and clear the sensor without it hanging...if it doesn't, you've got too much play...tighten the sleeve by repositioning the allen scrwew lockdown point