Quoted from JMCFAN:My movie code is 1.03... whats different? I got from originator and "donated"....
Below is what Stern introduced in 1.05, 1.06 and 1.07 (on the Prem) - there were no gameplay changes, although there were a few code fixes and setting changes (eg DNA extra ball now defaults to 6 DNA's - previously it was 8, but you can simply change this in your settings manually). Predominantly the updates are associated with Topper and IC
V1.07.0 - September 12th, 2022
==============================
- System - Updated to V3.22.0 on OS: V2.7.0
- Corrected potential game reset issue.
- When entering a WiFi password, the previous characters will be displayed as an asterisk.
The WiFi password will be displayed as all asterisk when entering the setup screens or scanning
the WiFi setup QR code.
- Added Service Menu Tech Alert when weak signal strength is detected. The signal strength
and SSID will be displayed. An average signal strength < 40 is considered weak. A weak
WiFi signal may contribute to a slower or inconsistent connection which may effect the abilty
to login or download software updates. Signal strength can be improved by the use of an
inexpensive WiFi extender. A wired Ethernet connection can also be used in cases where WiFi
signals are problematic.
- Added Standard Adjustment "ENABLE HOME TEAM IN COINPLAY", default value of NO.
Setting this to YES will allow Insider Home Team to be available for machines not
set to Free Play. Normally "USE INSIDER HOME TEAM" is only available in Free Play
mode. Many home players, who choose to use their game in Coin Play, have requested
the ability to enjoy Home Team! Setting this this adjustment to YES will default the Home
Team Guest Retention to Never. If you wish a different setting you will have update that
adjustment after enabling Home Team in CoinPlay. Home Team is not available for machines
registered to a Pro account operating in a commercial environment.
- Added Standard Adjustment "REMOVE FRACTIONAL CREDITS". Values are:
"NEVER" and "AFTER X MINUTES IDLE", where X is between 30 and 240.
The default value is "NEVER". If the game is idle (no coin or flipper
switch activity in attract mode) for X minutes, any fractional credits will
be removed. Whole credits will NOT be removed.
- Added Standard Audit "FRACTIONAL CREDITS REMOVED", which will track the number of
fractional credits that have been removed when the game was idle.
- Changed the default value for Insider Connected Software Update to "Install updates automatically".
V1.06.0 - July 29th, 2022
=========================
- Insider Connected - Home Team
The Home Team features allows Insider Connected players to log in
and play without scanning their QR code.
When the game is registered to a home location and set to Free Play,
Home Team can be enabled via Standard Adjust #51 or from Guided Setup.
Up to 8 players can be added to the Home Team from the Stern Insider
Connected Setup menu.
The Home Team can be shared across all games registered at the game's
location by enabling the Home Team Standard Adjustment on each game.
Players need only be added once to the Home Team. Players can be
later removed from the Home Team, and guests can be temporarily
added to the Home Team.
Find out more about Home Team at http://insider.sternpinball.com.
- Insider Connected - fix issue with awarding the Perfect Paddock achievement when the Dinosaur was captured before the last worker
- Insider Connected - prompt Player to log in when not already logged in when there is not a valid playfield yet
- Insider Connected - adjustments to Game Over screen for use with Insider Connected
- Escape - fix issue with using the outlane save when the system ball saver is active
- Invalid Frenzy - add a few more error messages
- Attract - fixed an issue with long pricing string combinations
- Adjustment Changes:
- changed "TARGET GAME TIME" default to 1:45
- changed "DNA COMBOS EXTRA BALL" default from 8 to 6 to match what the PRO version of the code does
- changed "IC GOAT MANIA SUPER SUPPLY DROP" to default to NO when the competition install is made
- removed "ATTRACT ADD PLAYERS" will always prompt for adding players
- System - Updated to V3.20.0 on OS: V2.6.0
- Updated to nodeboard firmware/protocol v1.00.0
- Correct the replay score boost when Standard Adjustment REPLAY TYPE is set to DYNAMIC.
All REPLAY LEVELS for all players are potentially immediately incremented instead of only replay level 1.
- Correct Standard Adjustment FREE PLAY LIMIT. Previously this adjustment would not be honored
in all circumstances. FREE PLAY LIMIT sets the maximum number of free games which a
player can win during a game. Once the FREE PLAY LIMIT is reached, a player will not receive
a free game from:
a REPLAY level (if REPLAY AWARD is set to CREDIT)
a SPECIAL (if SPECIAL AWARD is set to CREDIT)
Grand Champion/High Score (if HIGH SCORE AWARD is set to CREDIT
a match (if MATCH AWARD is set to CREDIT)
The default setting for FREE PLAY LIMIT is 5 games (per player per game played).
NOTE setting the FREE PLAY LIMIT to a value less than the number of REPLAY LEVELS
will decrease the number of REPLAY levels available.
- Fix redundant sound effect when scanning into Insider Connected in some
instances.
- Added Standard Audit "Total Power On Time". This is a lifetime audit of the
hours, minutes, seconds the machine has been powered on. This lifetime audit
will start accumulating with this update.
- Added the ability to unregister a machine via the Stern Insider Connected menu.
A machine must be unregister from an Insider Connected account prior to being
added to a new account. Hilighting and selecting "Yes, unregister this game."
will unregister the game from your account.
- Stern Insider Connect Setup Screens:
IP, network name, and WiFi signal strength displayed in top corners of display.
- Added Net->About->Events page
This page will display:
The current date and time
The date and time the game was recently powered on
The play count since powered on
The coin count since powered on
The paid credit count since powered on
The service credit count since powered on
The coin door open count since powered on
The tilt count since powered on
The date and time the game was previous powered on
The date and time the game was previous powered off
The lifetime power on count
- Update the factory default value of "ALLOW LEFT+START TO END GAME" to "FREE PLAY ONLY".
- Update Install Competition: set "ALLOW LEFT+START TO END GAME" to "NEVER".
- Added new Standard Adjustment "COIN ACCEPTOR" whose value can be "MECHANICAL" or "ELECTRONIC", and
default value is "MECHANICAL". This adjustment is only available when the Country is set to Italy
and Free Play is set to No.
The coin door for Italy with a MECHANICAL acceptor is configured:
left coin switch: EUR 0.50
center coin switch: EUR 0.10
right coin switch: EUR 0.50
4th coin switch: EUR 0.10
5th coin switch: EUR 0
6th coin switch: EUR 0
The coin door for Italy with a Electronic acceptor is configured:
left coin switch: EUR 0.50
center coin switch: EUR 1.00
right coin switch: EUR 2.00
4th coin switch: EUR 0.20
5th coin switch: EUR 0
6th coin switch: EUR 0
- Guided Setup
Added "Coin Acceptor" setting, only available when Country is set to Italy and "Free Play" is No.
Hide "Game Pricing" when "Free Play" is set to Yes.
Add translation strings for some top level selections.
- Fix game reboot issue at power on with coindoor interlock switch in the open position.
- Insider Connected attract mode screen updated to display the location name and green check mark with
Verified Location if the machine is registered to a pro account.
V1.05.0 - November 18th, 2021
=============================
- Insider Connected - achievements added. see achievement list on https://insider.sternpinball.com/
- Goat Mania - mode has now been added to the game if you are connected to Stern IC
- Goat Mania - without a Topper this mode will now start on the 5th Super Supply Drop
- Goat Mania - with a Topper this mode will only start via Topper Letter collection as usual
- Adjustment Changes:
- added "IC GOAT MANIA SUPER SUPPLY DROP" only when a topper is not connected, default to YES
- override "TOPPER LETTERS START GOAT MANIA" to NO for competition mode
- System - Updated to V2.97.0 on OS: V2.4.0
- Updated to nodeboard firmware/protocol v0.80.0
- Added Standard Adjustment "LCD DISPLAY BRIGHTNESS" to allow dimming of LCD display.
- Added adjustments for Login and Play Again display timers:
AD_NET_LOGIN_TIMER - "INSIDER LOGIN TIMER" default 30 sec
AD_NET_PLAY_AGAIN_TIMER - "INSIDER PLAY AGAIN TIMER" default 20 sec
- GAME RESTART (hold start button) behavior change:
Holding the start button on ball 2 or greater will follow the
logic of the AD_START_BUTTON_BEHAVIOR adjustment.
If (AD_GAME_RESTART == YES) and (AD_START_BUTTON_BEHAVIOR == ADV_START_BUTTON_BEHAVIOR_ALL_LOGGED_IN)
holding the start button on ball 2 or greater will restart the game for as many
players as is necessary to accomodate the users that are logged in.
If there are not enough credits to restart the game for the necessary number
of players, the the game will not be restarted.
- Address Insider Connected game registration corner cases.
- Upon entering the Service Menu for the first time after a software update, a screen
will display the game and system version numbers. This screen will be displayed
for a minimum of 1 second, and is dismissed by the enter button. This replaces
the dots display previous shown at power on after an update.
- Login changes:
* When a user logs in during a game in progress and the player up slot
is occupied, assign the user in the first open slot from lowest
player to the highest player.
* When a user joins a game in progress, award achievements that were
earned up to that point.
* When user authorization failure, remove the user from the session.
Added audits for connectivity games and scanner use
- Connectivity support for Spike 2 games.
- Added Standard Audit "Total Power Ons" which will display the number of
time the machine has been power cycled (Spike2 only). This audit was added in
system 2.45 and is not included for display.
- Update HSTD RESET COUNT adjustment to increment/decrement by 100s when >= 100 and
by 10s when < 100
- Turn on cabinet lights, if installed, when in the Service Menu.