Adjust the leaf switches first before you drive yourself crazy. If they were firing on their own then that would indicate that one of the leafs are too close together. When it stops firing all together it’s because they are making contact for an extended amount of time. The spike 2 system will cut voltage so it doesn’t short. The problem likely has nothing to do with node board.
Quoted from ufiti:Might be a long shot... but, does anyone happen to know which connector on the node board corresponds with the right sling? I'm having a difficult time tracing the wires back. Was having an issue with the right sling firing on its own / not working at all, which was resolved by reseating all the connectors (after I ruled out anything else causing it). It was then totally fine for about a week and a half, then it happened again for a bit last night.