You don't have fuses in F7-F9? Those do need fuses. The inside cover of the manual doesn't list them. But they are mentioned with the proper fuse on I think page 65 of the PPB board schematics.

I'm not sure mine does anything different with the door closed or open. The only time it's ever indicated that the door was open was when I installed the NVram. And all coils and flashers have worked with the door open when going through diagnostics.

I know F8 is 4amp for sure. Keep blowing that one.

Over fuse just means to not stick in a 5amp in place of a 4amp, like I did. Since f8 kept blowing, I thought that I'd try a 5a to see if that's what it was suppose to be. Nope. My right VUK started smoking, and was seriously hot. Like, I'm sure if I left the machine on for another 20-30 seconds, it probably would have burnt down the house.

My guess is that they printed up all the material before the game was finalized. But that PPB board schematics shows the proper amps for each one. Just make sure you stick those in.

Not sure what all the fuses connect to, but know F8 does the Right VUK and autoplunger. So my guess is f7 or f9 controls the flashers.