You can go into test and see if all coils fire, if switches work, make sure you have the right number of balls snd then get board work done
Manual
https://www.ipdb.org/files/4136/Sega_Jurassic_Park_The_Lost_World_manual.pdf
You're currently viewing posts by Pinsider northvibe.
Click here to go back to viewing the entire thread.
You can go into test and see if all coils fire, if switches work, make sure you have the right number of balls snd then get board work done
Manual
https://www.ipdb.org/files/4136/Sega_Jurassic_Park_The_Lost_World_manual.pdf
Quoted from SteveAN:Chad and northvibe, thanks for your responses and sorry I took so long to get back.
I think I’m going to buy some new boards to get this thing working. One problem is I cannot properly test it because the DMD is not working, only the bottom half lights up.
Was thinking about starting with this board… https://www.pinballlife.com/mm5/merchant.mvc?Screen=PROD&Product_Code=RD-MPUWS
And then go from there, also maybe buying new ribbon cables at Marco just to rule those out as well since they are only $30.
Does that seem like a reasonable start?
Hmm only half your dmd is on? Do you have a spare to test with?
Pinball life has ribbons pretty cheap ish. I just ordered a bunch for wpc stuff.
Which board you talking about? The cpu ?
you can use the manual
https://www.ipdb.org/files/4136/Sega_Jurassic_Park_The_Lost_World_manual.pdf
there is a snagger section.
But you'll have to lower the snagger, either by test mode lower, or taking the belt off I'd think.
THen you can see the screws that hold the snagger together. You'll have to work from the magnet end, back to the truck.
The pin looks like it came out of the bushing/holder.
You're currently viewing posts by Pinsider northvibe.
Click here to go back to viewing the entire thread.
Wanna join the discussion? Please sign in to reply to this topic.
Great to see you're enjoying Pinside! Did you know Pinside is able to run without any 3rd-party banners or ads, thanks to the support from our visitors? Please consider a donation to Pinside and get anext to your username to show for it! Or better yet, subscribe to Pinside+!
This page was printed from https://pinside.com/pinball/forum/topic/jurassic-park-lost-world-troubleshoot?tu=northvibe and we tried optimising it for printing. Some page elements may have been deliberately hidden.
Scan the QR code on the left to jump to the URL this document was printed from.