Jurassic Park
Data East, 1993Ok, I have a JP. About 3 months ago I did a flipper rebuild, the machine has worked great. About a week ago my left flipper seems to “lose power”. It flips about 6 Times perfect then 3 or 4 it moves really slow then perfect. It goes back and forth randomly like that. I checked the fuses, replaced the coil twice but it continues. Anyone have any ideas?
Did you check the cabinet switch? I thought my board was acting up again then I looked at the flow chart. (http://techniek.flipperwinkel.nl/desega/index2.htm#flip0) I cleaned the switch, reflowed the solder, and adjusted it tighter. Now it works consistently.
On de flipper assembly’s there is a red plastic tip that activates the switch . If that is right or missing it causing weak power because it’s not engaging the switch right . Make sure the switch is opening and closing properly
Wanna join the discussion? Please sign in to reply to this topic.
Great to see you're enjoying Pinside! Did you know Pinside is able to run without any 3rd-party banners or ads, thanks to the support from our visitors? Please consider a donation to Pinside and get anext to your username to show for it! Or better yet, subscribe to Pinside+!
This page was printed from https://pinside.com/pinball/forum/topic/jurassic-park-flipper-problem-1 and we tried optimising it for printing. Some page elements may have been deliberately hidden.
Scan the QR code on the left to jump to the URL this document was printed from.
Lombard, IL
London, ON