Jurassic Park
Data East, 1993You're currently viewing posts by Pinsider mesz.
Click here to go back to viewing the entire thread.
Anyone know the part number for the metal hardware piece (see pic) that is on the underside of the playfield? Also, if known, where to get it? Not finding it on the typical sites!!
Also, I see that they use to make the plastic ramps for JP but everywhere I look they're "out of stock"! Any leads on this would be appreciated!
Quoted from Soapman:I would send Terry a email to get some measurements on this to see if it will work.
http://www.pinballlife.com/index.php?p=catalog&mode=search&search_in=all&search_str=playfield+Pivot+Bracket
Thanks for the post and the link. With the link you provided I now see what it's actually called so I searched on "pivot bracket" and see that Marco does have them http://www.marcospecialties.com/pinball-parts/500-5329-02
Cleaning up a JP for a guy and am in need of a picture of the under chute, specifically where the chute attaches to the underside of the dinosaur! This game had just a screw through the ramp and into the motor. I would assume there would be a spacer or something that would make it a little more sturdy!! Appreciate a picture please!!
Quoted from GRB1959:I was waiting for PRETTY PLEASE, but I guess PLEASE will have to do. Here you go. Hopefully these photos will help you out.
Gord
DSCN3444.JPG
DSCN3577.JPG
THANKS Gord!!!
Quoted from GRB1959:Hi Vince,
Post #1178 now contains an additional photo which contains the measurements that you requested.
Gord
Thanks!!
Need some help, cleaning up a JP and like most games I found all kinds of parts in the cabinet. Only two parts I really need someone to advise if there is a place for them and then there is the gate that diverts the ball when coming down the lucid ramp along the left side.
1. Start with the gate, can someone shoot me a picture of the long post that support the plastic ramp that is right by the gate? There was a screw that came through the playfield that attached to a hex post and that is it. The screw was actually in the bottom of the cabinet and jut the hex post was holding the ramp up. Is there anything else to this support of just the screw through the playfiled into the hex post and then to the ramp?
2. There is a very small (7/16") grey post (spacer) laying in the cabinet. This is like the small posts that support the platform below T-Rex but is there a place where a third one goes?
3. Lastly, there is also a 1" grey post (spacer). Unlike all the other ones that are (I think) 1 1/6th or 1 3/16th (cant remember and not in front of the game) mostly supporting the plastics around T-Rex
Appreciate the input!!!
Quoted from markp99:1. That long post is attached with a screw and flat washer from the underside of the playfield. There is another screw and star washer on top attaching the ramp, as well as that horizontal metal member - per this photo.
post.png
2. There is a ~7/16 grey plastic spacer where the subway attaches via the ~3" screw to the base of TRex. I've not bumped into another spacer on the underside.
3. As you note, the only topside grey plastic spacers are the 1-1/4" ones supporting the plastics around TRex/Egg/Ratptor. There are ~4 of them around there as far as I can tell.
Hope that helps.
THANKS Mark .... it helps!
You're currently viewing posts by Pinsider mesz.
Click here to go back to viewing the entire thread.
Wanna join the discussion? Please sign in to reply to this topic.
Great to see you're enjoying Pinside! Did you know Pinside is able to run without any 3rd-party banners or ads, thanks to the support from our visitors? Please consider a donation to Pinside and get anext to your username to show for it! Or better yet, subscribe to Pinside+!
This page was printed from https://pinside.com/pinball/forum/topic/jurassic-park-club?tu=mesz and we tried optimising it for printing. Some page elements may have been deliberately hidden.
Scan the QR code on the left to jump to the URL this document was printed from.
London, ON
Ronkonkoma, NY