Jurassic Park
Data East, 1993You're currently viewing posts by Pinsider jurassicjarvis.
Click here to go back to viewing the entire thread.
Hello guys did woody end up putting a list of LEDs he used to make his machine look like it does, it looks amazing and would like mine to look the same? Also its brilliant to see thay after 25 years this machine is still so relevant and so many people are still playing 
Hi guys sorry abit random i was looking to have some of the parts of my pinball machine powdercoated, such as the legs the side and bottom trims the gun the coin mechanism. Originally i was going to go yellow on all these parts but after seeing a few machines with this set up i figured it didn't look as good as anticipated and i found this version on a website for a company that sells pinball machines over here in the UK based in London i believe. Anyhow here are some pics of there version, the playfield is rammed with dinasours probably abit much to be honest but the color scheme looks epic.
24939-jurassic-park-pinball-machine-backbox (resized).jpg24940-jurassic-park-pinball-machine-bumpers (resized).jpg24941-jurassic-park-pinball-machine-cabinet-left (resized).jpg24942-jurassic-park-pinball-machine-cabinet-right (resized).jpg24943-jurassic-park-pinball-machine-cabinet-trim (resized).jpg24944-jurassic-park-pinball-machine-coin-door (resized).jpg24945-jurassic-park-pinball-machine-flippers (resized).jpg24946-jurassic-park-pinball-machine-in-showroom (resized).jpg24947-jurassic-park-pinball-machine-jurassic-park-gates (resized).jpg24948-jurassic-park-pinball-machine-playfied-artwork (resized).jpg24949-jurassic-park-pinball-machine-playfield-models (resized).jpg24950-jurassic-park-pinball-machine-playield (resized).jpg24951-jurassic-park-pinball-machine-pterodactyls (resized).jpg24953-jurassic-park-pinball-machine-triceratops (resized).jpg24955-jurassic-park-pinball-machine-upper-playfield (resized).jpgQuoted from jorro:Thats a LOT of dino's!
Like the red! but personaly i would keep the gun handle black / maybe high gloss black
The baby t-rex upper left is trying to escape from the machine
Yes the baby T-Rex trying to escaps looks well really good idea, and as far as the gun goes yeah would probably look better if it was left black or better still chrome plated!!!
Screenshot_20181028-085336_Samsung Internet (resized).jpgQuoted from Chalkey:That looks amazing. Have you considered red t-molding for the head?
What do you mean red t-moulding?
Quoted from Scoot:Here are some images of the power supply board. In the upper right corner, you can see the test points with the voltage next to them. Take a voltmeter and put it on 20vdc. Turn on the machine and with the coin door closed, put the black lead on a grounding strap and the red lead on each of the test points. Each should match the output. Check the 5 volt test point and make sure it reads 5 volts. Any less will cause the dmd to not boot up or reset. So the machine will wait for the dmd to start with the GI on only and will just sit there.
I also took a close up shot of the capacitors that I replaced. They were the two blue ones (C7 and C2). From the pic you can see where it is a little shiny around those two. These will leak spilling out onto the board. This may or may not be your problem, so make sure you check all the basics first like fuses and reseating connectors and ribbon cables.
[quoted image][quoted image][quoted image]
Should i periodically change these capacitors evan if there is nothing wrong with my machine? Thanks.
You're currently viewing posts by Pinsider jurassicjarvis.
Click here to go back to viewing the entire thread.
Wanna join the discussion? Please sign in to reply to this topic.
Great to see you're enjoying Pinside! Did you know Pinside is able to run without any 3rd-party banners or ads, thanks to the support from our visitors? Please consider a donation to Pinside and get anext to your username to show for it! Or better yet, subscribe to Pinside+!
This page was printed from https://pinside.com/pinball/forum/topic/jurassic-park-club?tu=jurassicjarvis and we tried optimising it for printing. Some page elements may have been deliberately hidden.
Scan the QR code on the left to jump to the URL this document was printed from.
Sheffield
Needville, TX
London, ON