Biggest problem I have with this mod is losing the size of Wolverine. I have the Wolve LE and want him to remain as one of the larger focal points of the game. Once I see this done with a nice size Wolverine in place I will consider it. My original is still in one piece for now.

I want to see the pics of the kit installed and how you mount all those different busts. Then I will make a decision. I already have a Bowen Cyclops and a Bowen Gambit on my playfield so I wouldn't be opposed to using a Bowen Wolvie, but it would have to mount clean enough to be mistaken for factory.

As requested.

I removed a black post and ran his staff through the hole. It provides enough support to hold Gambit up but he must lean inward so that he can clear the glass. Im sure that this could be improved upon but I wanted every one of my mods to be 100% reversible and did not want to alter the bust.

IMG_1087.jpg

IMG_1086.jpg

Cyclops

I secured a piece of metal beneath the plastic and put a layer of velcro on top of the metal and underneath the bust. Two glue dots hold his hands attached to the ramp. Holds him very well. Again 100% reversible and the bust is unaltered.

IMG_1088.jpg

IMG_1089.jpg