Judge Dredd
Bally, 1993Hi
Everyting was fine and after 20-25 games the upper right flipper stop working. Coil is brand new, solders are good
The right flipper is working good. But I can see in the switch test that there is something missing (missing "square" on the grid)
Any ideas? I love this game so much!
Thanks
Lou
i would start by cleaning the flipper button optos with alcohol on a q tip to see if that solves the problem
Because there are two optic switches per cabinet button, one for the top and one for the bottom. Sounds like one isn't working. Swap the flipper cabinet boards from side to side and see if the issue persists.
I swapped right fliptronic with the one in my TOM. No success. Upper right flipper still not working
Quoted from Cheese_WizardPQ:I swapped right fliptronic with the one in my TOM. No success. Upper right flipper still not working
It could be somewhere in the wiring or connectors ?
Just the f*%# fuse
I'm almost 99% sure I measured it....
Sorry guy but thank you very much for your time!
Wanna join the discussion? Please sign in to reply to this topic.
Great to see you're enjoying Pinside! Did you know Pinside is able to run without any 3rd-party banners or ads, thanks to the support from our visitors? Please consider a donation to Pinside and get anext to your username to show for it! Or better yet, subscribe to Pinside+!
This page was printed from https://pinside.com/pinball/forum/topic/judge-dredd-upper-flipper-not-working and we tried optimising it for printing. Some page elements may have been deliberately hidden.
Scan the QR code on the left to jump to the URL this document was printed from.
North Hatley, QC
Hopkins, MN