You're currently viewing posts by Pinsider fuzz.
Click here to go back to viewing the entire thread.
I was reseating connections on the boards today, trying to diagnose a flicker issue. Upon reseating all the connections the flippers no longer work. i do not have a manual and a complete novice when it comes to diagnostics.
what is the flipper fuse?
any connection areas that I should be paying attention to?
the ball launch works as well as drop downs and switches when i manually control the ball.
Quoted from fuzz:I was reseating connections on the boards today, trying to diagnose a flicker issue. Upon reseating all the connections the flippers no longer work. i do not have a manual and a complete novice when it comes to diagnostics.
what is the flipper fuse?
any connection areas that I should be paying attention to?
the ball launch works as well as drop downs and switches when i manually control the ball.
solenoids all work in the solenoid test
i was only in the backbox so it has to be something related to the reseating of cables
Quoted from LTG:http://www.ipdb.org/search.pl Download manual here.
Go over connectors. Be sure you didn't miss any, have them on backwards, ribbon cables red stripe pin one each end and not off by a row of pins.
For a start I'd go to Tests - Switch Edge, and slowly push flipper buttons in. See if both optos on each one register on the DMD. So you know if you lost flipper button switch or power.
Four fuses on fliptronics board. I doubt you blew all of them.
LTG : )
Thanks LTG
You were right it was a connection problem.
I appreciate your help as always
You're currently viewing posts by Pinsider fuzz.
Click here to go back to viewing the entire thread.
Wanna join the discussion? Please sign in to reply to this topic.
Great to see you're enjoying Pinside! Did you know Pinside is able to run without any 3rd-party banners or ads, thanks to the support from our visitors? Please consider a donation to Pinside and get anext to your username to show for it! Or better yet, subscribe to Pinside+!
This page was printed from https://pinside.com/pinball/forum/topic/judge-dredd-flipper-issues?tu=fuzz and we tried optimising it for printing. Some page elements may have been deliberately hidden.
Scan the QR code on the left to jump to the URL this document was printed from.
Asheville, NC