(Topic ID: 268560)

Judge Dredd DMD

By Fm09138

3 years ago


Topic Heartbeat

Topic Stats

  • 17 posts
  • 6 Pinsiders participating
  • Latest reply 3 years ago by underlord
  • No one calls this topic a favorite

You

Linked Games

Topic Gallery

View topic image gallery

76251156-1DFC-4114-8A28-98126E185405 (resized).jpeg
A2BBCE7B-5454-49F3-8E91-A54D1D7A16EB (resized).jpeg
#1 3 years ago

Hello all. I have been having this issue for a couple of years now and finally try to fix. If you look at my pics you will see what the dmd does intermittently. When the dmd goes down as shown on the left I disconnect the molex on the dmd and put it back in and it works. Pic on the right. Any ideas what is causing this and how I can fix it. Thank You

A2BBCE7B-5454-49F3-8E91-A54D1D7A16EB (resized).jpegA2BBCE7B-5454-49F3-8E91-A54D1D7A16EB (resized).jpeg76251156-1DFC-4114-8A28-98126E185405 (resized).jpeg76251156-1DFC-4114-8A28-98126E185405 (resized).jpeg
#2 3 years ago

Power off. Reseat ribbon cables both ends from CPU to DMD driver board to DMD.

See if that helps.

LTG : )

#3 3 years ago

Reseated all of them and didn’t work. Once powered back on the same until I removed and replaced the molex on the dmd.

#4 3 years ago

I don’t see any loose connections

#5 3 years ago

Be sure to check the bottom of the DMD controller board (in the backbox)- these things are notoriously high failing - the section at the bottom is the HV section...it tends to be crispy.....and reseat those connectors as well...likely your problem is at the board...

#6 3 years ago

Anyone have any ideas? Once it’s running it looks good but can die again anywhere from 3 -8 hours.

#7 3 years ago

Dmd controller board is new and still looks good

#8 3 years ago
Quoted from Fm09138:

Dmd controller board is new and still looks good

New as in Rottendog?

#9 3 years ago

I'm thinking you could be dealing with a bad DMD, especially if you've already replaced the DMD board... they don't last forever and as they get older they outgas and draw more power. Or it could be the pins need the solder reflowed, especially if as you say plugging and unplugging the board "fixes" the issue for a short time.

Do you have any other DMD games? You can always swap the DMD and see if the problem follows the display.

#10 3 years ago

Yes it’s a rottendog

#11 3 years ago

COLORDMD will fix it good! And no more high voltage circuit issues.

#12 3 years ago

I’ve been thinking about a color dmd. The Judge Dredd one looks pretty awesome

#13 3 years ago
Quoted from underlord:

COLORDMD will fix it good! And no more high voltage circuit issues.

Indeed, if you have to replace a DMD, a DMD board, or both, may as well just put that cash towards a CDMD.

#14 3 years ago
Quoted from gunstarhero:

Indeed, if you have to replace a DMD, a DMD board, or both, may as well just put that cash towards a CDMD.

Agreed

#15 3 years ago

I’m convinced. Hope it fixes my issues. Thanks

#16 3 years ago

Measure and report all the voltages at the DMD power connector. -112v, -100v, 12v, 5v, and 62v
I have seen failed DMD's with the same result, even with good voltages.

#17 3 years ago
Quoted from Fm09138:

I’m convinced. Hope it fixes my issues. Thanks

See my collection. I’m a huge W/B Superpin fan. They all got ColorDmd.

Promoted items from Pinside Marketplace and Pinside Shops!
$ 9.95
Eproms
Pinballrom
 
$ 72.95
Eproms
Pinballrom
 
$ 85.00
$ 30.00
Playfield - Other
YouBentMyWookie
 
From: $ 99.99
Cabinet - Other
Lighted Pinball Mods
 
$ 65.00
Cabinet - (Alt) Translites
Pinball Haus
 
4,000 (Firm)
Machine - For Sale
Richardson, TX
5,000
Machine - For Sale
New Castle, CO
$ 14.00
Cabinet - Toppers
Twisted Tokens
 
From: $ 110.00
Playfield - Other
Arcade Upkeep
 
$ 9.95
Eproms
Pinballrom
 
$ 69.99
Playfield - Toys/Add-ons
Lighted Pinball Mods
 
$ 1.00
Pinball Machine
Pinball Alley
 
5,300 (OBO)
Machine - For Sale
Minneapolis, MN
$ 99.99
Playfield - Toys/Add-ons
Lighted Pinball Mods
 
From: $ 19.99
Eproms
Matt's Basement Arcade
 
$ 35.00
Cabinet - Other
Rocket City Pinball
 
$ 5.00
Playfield - Protection
UpKick Pinball
 
$ 17.99
Eproms
Matt's Basement Arcade
 
$ 165.00
Playfield - Toys/Add-ons
DevilsMuse Arcade
 
$ 29.50
Playfield - Plastics
Pinball Haus
 
$ 19.95
Playfield - Toys/Add-ons
ULEKstore
 
$ 329.99
Lighting - Other
Lighted Pinball Mods
 
From: $ 20.99
Playfield - Plastics
Gameroom Mods
 
$ 29.00
Cabinet - Other
Filament Printing
 
5,000 (OBO)
Machine - For Sale
Dunkirk, MD
Great pinball charity
Pinball Edu

Reply

Wanna join the discussion? Please sign in to reply to this topic.

Hey there! Welcome to Pinside!

Donate to Pinside

Great to see you're enjoying Pinside! Did you know Pinside is able to run without any 3rd-party banners or ads, thanks to the support from our visitors? Please consider a donation to Pinside and get anext to your username to show for it! Or better yet, subscribe to Pinside+!


This page was printed from https://pinside.com/pinball/forum/topic/judge-dredd-dmd and we tried optimising it for printing. Some page elements may have been deliberately hidden.

Scan the QR code on the left to jump to the URL this document was printed from.