Good Morning,
I'm reaching out to anyone. . I have the problem with the balls wanting to keep launching. I don't know all the terms yet but I am learning. So it looks like the opto board sensors is not work the little light isn't on plus i put my finger to see if the sensors are working at all. I'm go to check and make sure its getting power. Its the board closes to the coin slots. What is your take on this please.
First check the opto board is getting power via the input connector. If it is getting power then it is most likely a failed opto. Either identify the failed opto and replace it, or buy a new opto board set. It is a common problem on these as the opto board runs hot.
Wanna join the discussion? Please sign in to reply to this topic.
Great to see you're enjoying Pinside! Did you know Pinside is able to run without any 3rd-party banners or ads, thanks to the support from our visitors? Please consider a donation to Pinside and get anext to your username to show for it! Or better yet, subscribe to Pinside+!
This page was printed from https://pinside.com/pinball/forum/topic/judge-dredd-12?hl=paulatron and we tried optimising it for printing. Some page elements may have been deliberately hidden.
Scan the QR code on the left to jump to the URL this document was printed from.
Santa Rosa, CA
Victoria, BC