OP

Quoted from flashinstinct:

While I'm waiting for my JP to arrive I've started work on my first little project. Idea will be to have a Barbasol can roughly 4-5" tall by roughly 2" wide with a light shining from within the can inside the DNA fluid and a light in the bottom portion to light from underneath. WIP. Really time to put that 3D printer to good use and start learning like a mad man.
[quoted image]

OP

Quoted from flashinstinct:

Here is how I plan the mod to work. The centrifuge tubes will contain glow in the dark resin activated by UV leds. Since resin is not conductive I will dip the UV led diodes directly inside the centrifuge tube essentially cementing the led inside the resin and the tubes. The lights will be able to get hooked up to a specific insert on the playfield essentially activating the resin when a specific insert is active . The bottom part of the unit under the centrifuge tubes will have white leds inside diffused by a translucant plate within the box (holes in the top portion of the plate) These white leds will be hooked up to the nearest GI and will always be on.
Again this is all theoretical but I am currently waiting on 3 things now. The glow in the dark powder, the new 06ml centrifuge tubes and UV leds. Will then have to calculate voltage and resistance to get it all to work.
Since I do not know the position of the unit yet I am not sure of a bracket system for it but will get to it once I cross that bridge. In theory what will be included (that quote me on this yet)
1 can mod
2 wire hook ups terminal with 2 splitter (if permitting, since I dont have the game yet I cant really tell what the hook ups will be)
1 mounting bracket
6 UV leds (pending brighteness)
2 white leds (pending brighteness)
1 sticker
Fully painted

OP

Quoted from flashinstinct:

Please explain. I'm more than glad to adapt to make this the ultimate mod. Are you saying the VR-2.01 kinda labels?