great work, love where this is going
the size reduction will make a big difference
You're currently viewing posts by Pinsider swinks.
Click here to go back to viewing the entire thread.
Quoted from flashinstinct:Nope now for some reason the STL file doesn't want to print the vial holes. I got them to print with 8. Redid for 7 because 8 would not fit and now I'm scrambling to find out why[quoted image]
is one of the shapes open and not closed or do you have a mark up line that is solid so all it can see is one large circle. If in doubt start a fresh file - as will save alot of time.
if the scale is out flashinstinct you could always design your own tubes in a carousel as one piece using this material, yell out if you need a hand.
https://www.shapeways.com/materials/fine-detail-plastic
it lights up well so then you can put a led strip in the can to shine down letting you or others mix up lighting
the first photo shows the section to the vertical i-beam is much thicker and gills in the i-beam and the second photo is the original thinner section - this will make it much stronger
Quoted from Royale-W-Cheese:Ahhh got it . TY
How's your machine treating you Swinks?
what machine?
Hey @flashinstinct, head up, unusal things happen but you have a good reputation on Pinside and made some real cool stuff including this mod.
I am sure everyone has faith in you and are confident that you will fix the issue and make them good. The gods might be telling you to slow down and take a breath.
You know if you ever need a hand / advice I am, as well as others are here to help out.
You're currently viewing posts by Pinsider swinks.
Click here to go back to viewing the entire thread.
Wanna join the discussion? Please sign in to reply to this topic.
Great to see you're enjoying Pinside! Did you know Pinside is able to run without any 3rd-party banners or ads, thanks to the support from our visitors? Please consider a donation to Pinside and get anext to your username to show for it! Or better yet, subscribe to Pinside+!
This page was printed from https://pinside.com/pinball/forum/topic/jp-amp-jp2-light-mod?tu=swinks and we tried optimising it for printing. Some page elements may have been deliberately hidden.
Scan the QR code on the left to jump to the URL this document was printed from.