Great that you try to cause trouble without pointing out real things - and I doubt that there are real issues as I used the factory films. So no chance for art issues unless the version changed....

Please point out the issues you see or don't write stuff like that.

Regards,
Mirco

Please see my special offer for joust playfields and unbreakable plastic sets here:

https://pinside.com/pinball/forum/topic/mircoplayfields-special-offer-joust-and-all-playfields#post-4710310

They are in stock and ready to ship right away.

Regards,
Mirco

Or use the offer on a good price and highest quality with immidiate availability...

By the way I do not have different quality levels as all playfields are made on high end machines...

Regards,
Mirco

Wait a minute. I was pushed into doing joust at tpf this year. At that time CPR did not put the title into production. After they must have heard that I run it they throw it into production. Bad luck for both of us here.

How can the art be better?!? I used the original screens which means you are either lying or CPR added something to the art what was not there originally.

The material I use for plastics is simply better than anything used before due to new development. There is no need for heat bend and there is no stress in the material and there are no cracks. I use a special diamond to polish the plastics which turn them out into a very similar finish than the laser cut produces but without typical laser burning. And there is no issue of adhesion between ink and plastic...

Never mind.

Isn't this a general club thread? If not I will get my posts deleted here. My apologies if I understood the topic wrong. I did not see CPR opening this topic....

Regards,
Mirco