(Topic ID: 214794)

Joust Owners - ostrich riders & pterodactyl slayers wanted *CPR playfield pics*

By j_m_

3 years ago


Topic Heartbeat

Topic Stats

  • 123 posts
  • 29 Pinsiders participating
  • Latest reply 3 months ago by BobLangelius
  • Topic is favorited by 14 Pinsiders

You

Linked Games

Topic Gallery

View topic image gallery

pasted_image (resized).png
79F33974-72FD-48B5-B641-3410F44450ED (resized).jpeg
57D575C6-64BF-4FA4-B458-E3E3B29BAF0D (resized).jpeg
F78206DC-C4CA-42BE-BE6E-9DEC2CCAE805 (resized).jpeg
20190529_104652 (resized).jpg
IMG_3425 (resized).JPG
IMG_3417 (resized).JPG
IMG_2642 (resized).JPG
IMG_2641 (resized).JPG
IMG_2640 (resized).JPG
IMG_2639 (resized).JPG
IMG_2638 (resized).JPG
IMG_2637 (resized).JPG
IMG_2636 (resized).JPG
IMG_2635 (resized).JPG
IMG_2633 (resized).JPG

There are 123 posts in this topic. You are on page 3 of 3.
#101 2 years ago

It has arrived.!

20190529_104652 (resized).jpg
4 months later
#102 2 years ago

for those not following my playfield swap thread
https://pinside.com/pinball/forum/topic/joust-cpr-playfield-swap-process-and-tips

I have found the four playfield hanger brackets will not fit the new CPR playfield without having to route out a 1/16" deep by 1-1/2" x 2" section of the playfield for each bracket location due it being 9/16" thick (the original playfield is 1/2" thick

I am having 25 sets of new brackets made out of mild steel, w/ [blue] zinc plating, just like the originals and will supply 4 decals to be applied to the brackets (2 each of "LIFT FROM THIS SIDE ONLY" and "LIFT FROM OTHER SIDE ONLY")

once these 25 sets are gone, that's it, you're on your own. I am funding this on my own dime and do not intend to have any more made
the cost per set (of 4 pcs w/ decals) is $52 plus shipping. as I type this, 13 set remain unspoken for

1 week later
#103 2 years ago

there's a strong possibility that I will have the completed playfield hangers on or by October 21st and ready to ship. once I have them in hand, I will calculate the shipping costs and send people the total amount due

there are only 10 sets left unspoken for, so if you want a set, now is the time to speak up

#105 2 years ago

the template for the bracket decals is complete. they were pretty basic to begin with, but are pretty close to the originals

F78206DC-C4CA-42BE-BE6E-9DEC2CCAE805 (resized).jpeg
#106 2 years ago

bracket update:
the playfield hanger bracket decals are all printed and have been cut and packaged up to be included with each set of brackets

I will have the brackets in hand next monday, oct 21st, so look for a pm with a total amount due and payment information

#107 2 years ago

the brackets have arrived. I need to pick up some shipping boxes and calculate total costs

look for a total amount due tomorrow

57D575C6-64BF-4FA4-B458-E3E3B29BAF0D (resized).jpeg
1 month later
#108 1 year ago

I still have 7 sets of the playfield brackets available and I am now offering solid oak wooden ball guides
https://pinside.com/pinball/forum/topic/joust-owners-gauging-interest-for-solid-oak-guide-rails

#109 1 year ago

How are the plastic sets coming??

1 month later
#110 1 year ago

Any updates??

#111 1 year ago

I have no idea what is going on with CPR and the joust playfield plastic sets. the last time that I spoke with kevin (6+ months ago), I told him that I still have the heat bending jig that I made and would gladly help out if needed.

#112 1 year ago
Quoted from j_m_:

I have no idea what is going on with CPR and the joust playfield plastic sets. the last time that I spoke with kevin (6+ months ago), I told him that I still have the heat bending jig that I made and would gladly help out if needed.

Sounds good JM. nOT In a hurry , but wanted to bump this for the others that may have an interest.

8 months later
4 months later
#114 7 months ago

Hey Joust fans!
We need just *2* more pinball machine reviews to pop in at #286 on the top-400

Can you check the ratings page and see if you've already uploaded your rating?
https://pinside.com/pinball/machine/joust/ratings
-mof

#115 7 months ago

Has anyone purchased the Joust playfield plastic aprons from Mirco? Just wanted to check since he shows no pics.

#116 7 months ago

Bump for 2 more ratings to get BACK into the top-400, since the minimum ratings jumped up to 25...

3 months later
#117 4 months ago

On the hunt for 4 of these drop targets!! Wondering if anyone on here might have some they’d part with?!
Thanks
db

79F33974-72FD-48B5-B641-3410F44450ED (resized).jpeg
#118 3 months ago

those are the roll over variety, correct? good luck. I've been searching for those for about 5+ years now

#119 3 months ago
Quoted from Borntolose:

On the hunt for 4 of these drop targets!! Wondering if anyone on here might have some they’d part with?!
Thanks
db
[quoted image]

I could pretty easily draw up something to 3d Print. But that probably won't last long....

#120 3 months ago
Quoted from BobLangelius:

I could pretty easily draw up something to 3d Print. But that probably won't last long....

Trying to find em. 3D printed is the quality I’m looking for!! Thanks tho

#121 3 months ago
Quoted from BobLangelius:

I could pretty easily draw up something to 3d Print. But that probably won't last long....

Trying to find em. 3D printed isnt the quality I’m looking for!! Thanks tho

#122 3 months ago

Yeah, when you find that stash of them i'll take a couple too.

Maybe you could make an add-on that screwed to the back of the regular target, Then cover the screws with the target graphic...

#123 3 months ago
pasted_image (resized).png
There are 123 posts in this topic. You are on page 3 of 3.

Hey there! Got a moment?

Great to see you're enjoying Pinside! Did you know Pinside is able to run thanks to donations from our visitors? Please donate to Pinside, support the site and get anext to your username to show for it! Donate to Pinside