You're currently viewing posts by Pinsider phergott.
Click here to go back to viewing the entire thread.
Hi all, so I'm replacing a broken female socket, but in order to do that I have to remove the rivet near the mounting bracket. As of now I figured on using a screw and nut to replace it when I'm done. I'd rather use a rivet, but don't know what type of rivet or squeeze tool. Any suggestions?
-Chris
Quoted from hoov:I'll see what I got
Quoted from goldenboy232:I may have one too, and since I'm 15 minutes from you, could drop it off. Let me look tonight.
Okay guys, thanks. Hope you come with one.
Quoted from flipit:Dremel tool to grind off brass rivet on just one end, twist apart an remove and replace the bad socket. I use small machine nut and bolt. Probably faster than doing all the soldering. Good luck
Yes, much easier, standing by with the nut and bolt in case hoov or Mark don't come up with one. ☺
Quoted from goldenboy232:Sorry Chris, I have an extra 2 x 8, 2 x 5, and 2 x 3, but not a 2 x 6 Jones Plug. Hoov might be your best bet.
Thanks for looking Mark.
You're currently viewing posts by Pinsider phergott.
Click here to go back to viewing the entire thread.
Wanna join the discussion? Please sign in to reply to this topic.
Great to see you're enjoying Pinside! Did you know Pinside is able to run without any 3rd-party banners or ads, thanks to the support from our visitors? Please consider a donation to Pinside and get anext to your username to show for it! Or better yet, subscribe to Pinside+!
This page was printed from https://pinside.com/pinball/forum/topic/jones-plug-rivet-question?tu=phergott and we tried optimising it for printing. Some page elements may have been deliberately hidden.
Scan the QR code on the left to jump to the URL this document was printed from.
University Place, WA