Quoted from SilverballSleuth:part of the cabinet is missing. The rail piece which holds the translite in place.
You're currently viewing posts by Pinsider grumpy.
Click here to go back to viewing the entire thread.
Quoted from SilverballSleuth:part of the cabinet is missing. The rail piece which holds the translite in place.
Quoted from SilverballSleuth:The wood piece at the top of the cabinet. That rail.
You will have to make one from oak on the table saw, I did this for my pinbot as someone opened the backbox by prying this off on mine.
Quoted from SilverballSleuth:there are extra characters on the display
Where they there when you bought it or just after the move?
Quoted from SilverballSleuth:The guy told me it had been pryed off - I hadn't seen one missing before. Think I should try and color match the blue or just go for a different color? Do you happen to know the dimensions of that piece?
I don't know but I can measure mine on my pinbot. I was lucky as pinbot is black and black is easy to match.
Quoted from SilverballSleuth:The extra characters were there when I picked it up.
This can be the CPU board or it can be the display driver board. There are a few signals that are not pulsing and stuck high.
Quoted from SilverballSleuth:How would I test that?
You would need a logic probe.
You're currently viewing posts by Pinsider grumpy.
Click here to go back to viewing the entire thread.
Wanna join the discussion? Please sign in to reply to this topic.
Great to see you're enjoying Pinside! Did you know Pinside is able to run without any 3rd-party banners or ads, thanks to the support from our visitors? Please consider a donation to Pinside and get anext to your username to show for it! Or better yet, subscribe to Pinside+!
This page was printed from https://pinside.com/pinball/forum/topic/jokerz-im-in-for-a-doozy?tu=grumpy and we tried optimising it for printing. Some page elements may have been deliberately hidden.
Scan the QR code on the left to jump to the URL this document was printed from.