Jokerz!
Williams, 1988You're currently viewing posts by Pinsider mesz.
Click here to go back to viewing the entire thread.
Looking for a few plastic if anyone has some used ones laying around.
https://pinside.com/pinball/forum/topic/wtd-jokerz-plastic-parts-#post-6404406
23CE0B6C-DD8C-4E7B-AB31-A71A77DE3427 (resized).jpeg29B4B3B2-404A-428D-B8D3-21343A5A7348 (resized).jpegQuoted from JodyG:I have the new ramps available as complete assemblies now if you don't want to rivet. Both sides and the middle. The store is closed for vacation until August 1st though. https://rampomatic.com/products/williams-jokerz-center-ramp-03-8195?_pos=5&_sid=33c13683d&_ss=r
JodyG you ever consider a package deal on all three ramps?
Separate subject, still in search of a right plastic for slingshot.
Can someone confirm for me the length of the standoff post that the 'DOUBLE YOUR SCORE' plastic is attached too? The machine I am working on doesn't have this plastic piece so I am going to order it but need to know the size of the screws and the plastic post.
Quoted from Timerider:On mine, the left two, that were screwed in, are 11/32". And the free-hanging right ones are 9/16".
And I'd say the screws are a #6-32x3/4" and a #8-32x3/4".[quoted image]
Brilliant.....thank you!
I am still in search of a right slingshot plastic.
On a comical note, I did have someone reach out to me and offer to sell me one for 100$ 
Quoted from ThatOneDude:Sorry, I realized I linked the wrong side sling.
I need to strip mine down to fix the playfield protector soon, so I could try to scan in the plastics. Then, you could have it printed and make a plastic, like I did for dracula.
Appreciate the offer and PM me when you get to that point. How/where did you get the Dracula printed at? How did they turn out? I have never seen someone do this so interested in seeing how things were done.
I will continue searching for a used one till then!
Quoted from hawkeyexx:I have used slings.....can you assemble my game back together....
[quoted image][quoted image]
You looking to sale the used slings? If so PM me.
If I were closer be glad to help ya with reassembling your playfield but obviously it’s not feasible since I’m in CA
Quoted from Sean_bc:In case anyone is looking for pf parts...
[quoted image]
Quoted from fixintoplay:PM sent.
Quoted from MANTO1975:Do you have the link for this?
cheers
https://www.facebook.com/commerce/listing/254021796542562?media_id=0&ref=share_attachment
I had sent the seller a few messages asking for parts and never received a reply. Just FYI
Quoted from fixintoplay:Asking a favor. I need the exact width dimension for the Jokerz! backbox, (my contractor needs it) and I'm getting mixed results from different sources. Mine's in storage, boxed/wrapped and currently inaccessible. Thanks in advance.
OD is 28 3/4" x 28 3/4"
The sides are tapered 9 1/4" at the top 7 7/16" at the bottom
Anyone know the size of the tubular rivets for the upper playfield? Also, a good source to get them from?
Quoted from WiZaRd15425:I just picked up a Jokerz! I accidentally revered the 12vdc feed to the poker wheel board. It has stopped working. I can’t seem to find the wheel schematic in manual. Does anyone know of a poker wheel schematic available to download?
TIA.
It's my understanding that the Motor Control Board (D-12045) that was used in Jokerz was also used in Cyclone and Riverboat Gambler. Here's the schematic that I found for Cyclone so you should be able to use it!
JOKERZ WHEEL (resized).PNGJOKERZ WHEEL SCHEMATICS (resized).PNG
Quoted from TAVsPlace:Have a new Populated upper playfield, does anyone know if there is a replacement tape for the back of it? I found a part number on the tape but came up empty on finding it.
[quoted image][quoted image][quoted image]
Take some Goo Gone to what you have there. It will clean up really nice. Then buy some double faced tape https://smile.amazon.com/gp/product/B007Y7CSAC/ref=ppx_yo_dt_b_search_asin_title and it will turn out a lot better than you'd expect.
I did one for a guy maybe 6 months ago and it was in worst shape then yours. Picture below is not the best but it’s all I have. Everything on the upper playfield is new except that "tape".
22A2C265-C695-4CC5-9228-06C4606B8E3B (resized).jpeg
Quoted from rotordave:Looks like someone removed your lamp relay … bottom right corner, you can see the white standoffs there with no board.
rd
Removed it after it burned up. The pf is pretty toasted where the connector would be.
You're currently viewing posts by Pinsider mesz.
Click here to go back to viewing the entire thread.
Wanna join the discussion? Please sign in to reply to this topic.
Great to see you're enjoying Pinside! Did you know Pinside is able to run without any 3rd-party banners or ads, thanks to the support from our visitors? Please consider a donation to Pinside and get anext to your username to show for it! Or better yet, subscribe to Pinside+!
This page was printed from https://pinside.com/pinball/forum/topic/jokerz-club-quite-now-we-are-playing?tu=mesz and we tried optimising it for printing. Some page elements may have been deliberately hidden.
Scan the QR code on the left to jump to the URL this document was printed from.
Leesburg, VA