(Topic ID: 157710)

Jokerz adjust failure

By msadan

7 years ago


Topic Heartbeat

Topic Stats

You

Linked Games

You're currently viewing posts by Pinsider borygard.
Click here to go back to viewing the entire thread.

#4 7 years ago
Quoted from johnwartjr:

Is the coin door memory protect switch by chance stuck closed? Can you test it with a meter and confirm it is working correctly?

This is what I'm thinking as well. Something isn't allowing writes to the RAM.

Ensure J114 is connected properly and no evidence of battery leakage damage in the area. Remove J114 from the board and try again.

--
Rob Anthony
Pinball Classics
http://LockWhenLit.com
Quality Board Work - In Home Service
borygard at gmail dot com

#15 7 years ago

Yes the anyPin would definitely need to be set to 6116, or the CPU jumpered for 6264. Since the board is booting though, anyPin settings are correct.

This isn't an anyPin issue, the CPU is showing the same issue as before the anyPin install. So also not likely a soldering issue.

The CPU memory protect circuitry is likely bad.

--
Rob Anthony
Pinball Classics
http://LockWhenLit.com
Quality Board Work - In Home Service
borygard at gmail dot com

Promoted items from the Pinside Marketplace
$ 27.95
Eproms
Pinballrom
Eproms
2,200 (OBO)
Machine - For Sale
Little River, SC
$ 49.99
$ 54.99
Cabinet - Shooter Rods
Lighted Pinball Mods
Shooter rods
From: $ 17.99
$ 54.99
Cabinet - Shooter Rods
Lighted Pinball Mods
Shooter rods
2,750 (OBO)
Machine - For Sale
Frostproof, FL
$ 15.00
Cabinet - Sound/Speakers
Gweem's Mods
Sound/Speakers
From: $ 19.99
Eproms
Matt's Basement Arcade
Eproms
$ 54.99
Cabinet - Shooter Rods
Lighted Pinball Mods
Shooter rods

You're currently viewing posts by Pinsider borygard.
Click here to go back to viewing the entire thread.

Reply

Wanna join the discussion? Please sign in to reply to this topic.

Hey there! Welcome to Pinside!

Donate to Pinside

Great to see you're enjoying Pinside! Did you know Pinside is able to run without any 3rd-party banners or ads, thanks to the support from our visitors? Please consider a donation to Pinside and get anext to your username to show for it! Or better yet, subscribe to Pinside+!


This page was printed from https://pinside.com/pinball/forum/topic/jokerz-adjust-failure?tu=borygard and we tried optimising it for printing. Some page elements may have been deliberately hidden.

Scan the QR code on the left to jump to the URL this document was printed from.