The 1 & 2 bells on my Jokerz are lit at the beginning of every game, turn and/or player. The 3, 4 & 5 bells do light when they are earned and also award the bonus as they should. I did some repair work on the 5-lamp board that controls this function -- obvious in the photos. But a meter shows zero continuity between the 1 and 2 lamp traces, posts and connections. The board appears to check out fine. And both ends of that board's cable connectors look and test fine. I also did another factory reset with no change. Any ideas what's going on?

DSC08460 (resized).JPG

DSC08462 (resized).JPG

DSC08469 (resized).JPG

DSC08470 (resized).JPG

DSC08471 (resized).JPG

Adding another observation to bump. During startup attract mode, the fives bell lights flash individually in perfect sequence from left to right (1 thru 5). No errors are displayed. Would appreciate any help. Thanks

That makes sense. I will check it today. Thanks for your response, slochar!

Ah yes. My EM neurotransmitters are not adapting well to solid state. I had to read #46 twice before I got it. The language is implicit and counter intuitive, unless of course the reader is accustomed to SS logic. No need to even check the pin now. Thanks again.