You're currently viewing posts by Pinsider thatonedude.
Click here to go back to viewing the entire thread.
Had a reset on play today. Everything went dead, then it appeared to reboot(Ni Wumpf MPU). Kinda acted like a slam tilt. Do I need to disable the slam tilts on this thing?
Quoted from MrSanRamon:Would like to do this in a way that will keep me from causing a lot of collateral damage.
I will check on mine to verify.
Quoted from megoman:Any thoughts / suggestions in trouble shooting would be appreciated.
I no longer have one, but I would start with making sure that you have good grounds everywhere. Start here: http://www.pinrepair.com/sys1/index.htm#ground
That was the main thing I had to do. Then, I found some problems with the old Ni-wumpf board that was installed. But always fix the grounding first.
You're currently viewing posts by Pinsider thatonedude.
Click here to go back to viewing the entire thread.
Wanna join the discussion? Please sign in to reply to this topic.
Great to see you're enjoying Pinside! Did you know Pinside is able to run without any 3rd-party banners or ads, thanks to the support from our visitors? Please consider a donation to Pinside and get anext to your username to show for it! Or better yet, subscribe to Pinside+!
This page was printed from https://pinside.com/pinball/forum/topic/joker-poker-club-feel-free-to-chime-in?tu=thatonedude and we tried optimising it for printing. Some page elements may have been deliberately hidden.
Scan the QR code on the left to jump to the URL this document was printed from.