You're currently viewing posts by Pinsider PinballManiac40.
Click here to go back to viewing the entire thread.
Quoted from DudeMcAwesome:upon power up, the Flippers Lock for a moment then J112 Blows up.
Usually happens when this ribbon cable is plugged in one row off, especially at the (top left) fliptronics board.
2019-02-02 14_20_45-WPC ribbon cable to reseat - Paint (resized).pngDid you reseat all 4 connectors on the ribbon cable?
I think I would also press on all the socketed ICs on the MPU board as well. You will hear a lot of crunching as you press them.
Quoted from PinballManiac40:I think I would also press on all the socketed ICs on the MPU board as well.
Tried this yet?
You're currently viewing posts by Pinsider PinballManiac40.
Click here to go back to viewing the entire thread.
Wanna join the discussion? Please sign in to reply to this topic.
Great to see you're enjoying Pinside! Did you know Pinside is able to run without any 3rd-party banners or ads, thanks to the support from our visitors? Please consider a donation to Pinside and get anext to your username to show for it! Or better yet, subscribe to Pinside+!
This page was printed from https://pinside.com/pinball/forum/topic/johnny-mnemonic-on-boot-locks-solonoids-weird-dmd?tu=PinballManiac40 and we tried optimising it for printing. Some page elements may have been deliberately hidden.
Scan the QR code on the left to jump to the URL this document was printed from.
