So I’ve been having some issues with the glove and decided to pull it apart and check all the connectors. This one has me a bit confused...the connector is impossible to take apart and has a blue/white and a dark blue wire going in one side and an orange and purple/white wire going in the other side. The blue wires haven’t been properly pinned, it looked like they’ve just been soldered in there. Can I just snip the wires and connect dark blue to orange and blue/white to purple/black?

7E81598C-CA7B-4173-B53D-1DF6177B5A0C (resized).jpeg

My game is missing the left hand side post at the entrance to the right ramp. Does anyone know the part number/Marco link to this post?

I’m building a new Position Encoder PCB for my Johnny and am unsure of a component on the board. In the manual it only lists OPTO 1, but not OPTO 2. Looking at my board they are two different types. Does anyone know the part number for OPTO 2?

6D39FCE2-DDE8-44F8-8B40-3D8CD1AC315F (resized).jpeg

image (resized).jpg

Great stuff, thanks! Yes mine must have been rebuilt with a different looking opto (that does the same thing)

Here’s a good guide:
http://quinndunki.com/blondihacks/?p=1615