So "mod" is pushing it, but I wanted to make this searchable.

That little area on the backboard, next to and underneath the stationary hand, it has no graphic. That bothered me, and I can't ever leave well enough alone.

I ordered the large replacement sticker from Marco's, #31-2521-1.

I made a template out of paper and cut out the appropriate piece from the sticker. I had to cut some of the black edge lines off the remainder and add them. There is actually a little black Sharpie in there.

There's a good size piece left over i don't know what to do with. Probably nothing.
You could make flipper stickers I suppose.

Is it perfect? Is the little variation that noticeable? No. Can you do better? Probably.

If the next owner doesn't want it, it'll peal off easy.

Putting this out for the knowledge base.

image (resized).jpeg

image (resized).jpeg

image (resized).jpeg

image (resized).jpeg

image (resized).jpeg

I think the sticker was $6.

Also, on the left ramp, I had read that these originally had stickers on them. Mine did not have it on the down slope. Marcos also has stickers for the center ramp bottom. With a little trimming it fits the left ok. It was $4.

image (resized).jpeg