Where can I get one of these chest mods?
You're currently viewing posts by Pinsider cooked71.
Click here to go back to viewing the entire thread.
Ok, here’s a good one....installed mod, connected correctly. Turn game on, and no lights working. Any ideas? Disconnect mod completely and still no lights.
Quoted from harryhoudini:Which lights? Chest mod lights? Or entire game no lights?
Sorry, entire game.
Quoted from harryhoudini:Check fuses in back box is probably a good idea. Screen powers on?
Yeh, everything works fine - can still play a game. Just no lights.
I’ll check the fuse and see.
Quoted from harryhoudini:Check fuses in back box is probably a good idea. Screen powers on?
All sorted - the little mini usb plug had slipped out of the lower left board that I had to remove to screw in the bracket to the fork mech.
Just another question - the little brass thing that secures the rod to the servo doesn’t rotate very well. It’s really hard to rotate (just the brass bit I’m talking about). I’m assuming this should spin fairly easily?
A2EC4704-98FE-475F-8BA5-F3C50A941C98 (resized).jpegQuoted from harryhoudini:Yup. It also only rotates a minimal amount (if you watch it when the mech is working you'll see that the amount of rotation of the brass coupler is equal to how much the knuckle rotates with the rod) and the servo is pretty powerful in that regard. The holes which those brass couplers go into are pretty tight.
I’ve already loosened off the tension disc and that didn’t help. Must be the hole is too small - the Servo struggles to move it and it’s actually quite hard moving it even with my fingers. Can you re- use the tension disc if I take it off to enlarge the hole?
You're currently viewing posts by Pinsider cooked71.
Click here to go back to viewing the entire thread.
Wanna join the discussion? Please sign in to reply to this topic.
Great to see you're enjoying Pinside! Did you know Pinside is able to run without any 3rd-party banners or ads, thanks to the support from our visitors? Please consider a donation to Pinside and get anext to your username to show for it! Or better yet, subscribe to Pinside+!
This page was printed from https://pinside.com/pinball/forum/topic/jjpotc-treasure-chest-open-and-close?tu=cooked71 and we tried optimising it for printing. Some page elements may have been deliberately hidden.
Scan the QR code on the left to jump to the URL this document was printed from.