Pirates of the Caribbean
Jersey Jack, 2018
Pirates of the Caribbean (CE)
Jersey Jack, 2018
Pirates of the Caribbean (LE)
Jersey Jack, 2018You're currently viewing posts by Pinsider palmab03.
Click here to go back to viewing the entire thread.
Very new to owning my own machine, and extremely brand new in trying to service one, so bear with me on being a complete novice.
But I'm getting a matrix switch #41 error, left slingshot, low (stuck closed). Basically the left slingshot just will fire over and over again, going on for usually 30 seconds and then stopping. Seems to go in and out. Was originally red on the matrix, but now it's stays green at all times (then it fires nonstop). Suggestions?
Quoted from LTG:Turn the game off. Remove the plastic over the sling shot kicker and leaf blade switches. Pull on the rubber ring around the posts, so you have equal pressure on all sides, not tight on the kicker/leaf blade switch side. The leaf blade switches - front long one should be resting on the rubber ring, not pushing it or away from it. Shorter rear one should be close enough so the slightest ball hit triggers it, yet vibration doesn't. There are two leaf blade switches, one each side of the kicker. At least one needs a little adjusting. When bending forward or backward, get as close to the fiberboard spacers as you can.
LTG : )
Thanks! Rotating the rubber ring seemed to do the trick, I didn't notice anything majorly wrong with the leaf blade switches.
Quoted from LTG:Tests - Switches - Matrixed - does it work there ? Hear it click ? Next I'd check with a meter, if it works, then broken wire from switch to the I/O board.
LTG : )
When you test them in switches - Matrix, it doesn't work there. So what's next?
It's also not the issue listed in the post below (I had that before but fixed it).
You're currently viewing posts by Pinsider palmab03.
Click here to go back to viewing the entire thread.
Wanna join the discussion? Please sign in to reply to this topic.
Great to see you're enjoying Pinside! Did you know Pinside is able to run without any 3rd-party banners or ads, thanks to the support from our visitors? Please consider a donation to Pinside and get anext to your username to show for it! Or better yet, subscribe to Pinside+!
This page was printed from https://pinside.com/pinball/forum/topic/jjpirates-of-the-caribbean-troubleshooting-tips-issues?tu=palmab03 and we tried optimising it for printing. Some page elements may have been deliberately hidden.
Scan the QR code on the left to jump to the URL this document was printed from.
Los Angeles, CA
Vernon, BC