You're currently viewing posts by Pinsider izzy24.
Click here to go back to viewing the entire thread.
Quoted from KingPinGames:the thumb screw goes in the coin door to hold the coin mech alignment bar (not really sure what it is called) in place. the other one looks like a standoff or spacer for under a board or switch.
Thanks! I see 2 of the thumb screws in place on the coin door mech, is there more than that?
Quoted from apinballwiz:I think there are a total of 4, two at the top of the coin mechs, 2 at the bottom.
Yup, that's it, thanks! One thumb screw was missing. I'm looking through the pop up mechs for the rest
Quoted from luckymoey:Pretty sure the spacer and screw are used to hold in the pop bumper spinner motor.
I’ll check it out, thanks!
Quoted from BladeFury:Look underneath where the mechanism that holds and allows forks slide up and down under the chest. On each side there is 2 screw and spacer setup as guides for the fork to go up and down...check it out!
I installed the chest mod, so familiar with that area. I have 2 screws&spacers with white plastic washers on one side of the fork lift. The other side has 2 empty holes to mount, but no screws and spacers like on the other side.
Quoted from LTG:Laying in the bottom of the cabinet somewhere.
LTG : )
I’ll get in there and look around for more. Thank you!
Quoted from bbulkley:You can still buy NIB at original pricing from Australia. Mine arrived this week and they have two left. No offense intended to Vic - that machine has nice mods and I’m sure will fetch the asking price.
Only 1 left - my buddy has one on the way
E3B42ACC-0B99-4D52-B4D2-5FBDD124548E (resized).jpegQuoted from MurphyPeoples:Lifted the hood on POTC yesterday to check out a switch, and found these two items sitting in the bottom of the cabinet. These weren't there a month ago.
Any ideas where they come from? Both were in the back right of the cabinet. I haven't messed with the BP. She's been working flawlessly.[quoted image]
I think it came out the rising forks chest mech. There are 4 guides for the forks (2 on each side) consisting of 4 screws, 4 metal sleeves, 4 nylon spacers, and 4 nylon washers. One probably popped out, you should have a sleeve and a spacer around somewhere if those are the parts...
B6A71508-E3F3-4F6F-ACF8-23610592698F (resized).jpegWho sells the dual flipper leaf switch? I’ve bought a couple thinking they were correct, but they don’t match. Thanks!
Hi All,
I had to remove the Black Perl because the switch on the left that opens the flap to the cannon was reported to be stuck open. I removed it and believe I know what needs to be repaired but wanted to double check with the group. I believe that the lose green wire needs to be soldered to the attached green wire below it. Can anyone confirm?
Quoted from Pinballomatic:Yes that seems correct. Double green.
[quoted image]
Thanks so much! Is that in the manual?
You're currently viewing posts by Pinsider izzy24.
Click here to go back to viewing the entire thread.
Wanna join the discussion? Please sign in to reply to this topic.
Great to see you're enjoying Pinside! Did you know Pinside is able to run without any 3rd-party banners or ads, thanks to the support from our visitors? Please consider a donation to Pinside and get anext to your username to show for it! Or better yet, subscribe to Pinside+!
This page was printed from https://pinside.com/pinball/forum/topic/jjpirates-of-the-caribbean-troubleshooting-tips-issues?tu=izzy24 and we tried optimising it for printing. Some page elements may have been deliberately hidden.
Scan the QR code on the left to jump to the URL this document was printed from.