Hello, I have a problem with my fork under the trunk. I looked at the tutorials on the site and I straightened the fork so when the look is ready the ball goes into the trunk. On the other hand, the fork does not come down when the look is not activated. I have activated test mode 018 and the fork fits correctly. On the other hand, when I activate test mode 019, the fork does not lower again. The pallet of the white coil activates well. Question: is the yellow coil supposed to pull on the mechanism at the same time as the pallet of the white coil goes down? When I manually pull on the mechanism (blue arrow) there is a big metallic friction (orange circle). Is the mechanism supposed to come back without the help of the yellow coil? Thanks for your help
IMG_20210417_180527 (resized).jpgIMG_20210417_180601 (resized).jpgIMG_20210417_182956 (resized).jpgIMG_20210417_203042 (resized).jpg