Pirates of the Caribbean
Jersey Jack, 2018
Pirates of the Caribbean (CE)
Jersey Jack, 2018
Pirates of the Caribbean (LE)
Jersey Jack, 2018You're currently viewing posts by Pinsider PanzerFreak.
Click here to go back to viewing the entire thread.
Installed the map Cliffys last night and it went very well. Make sure the entire map Cliffy is flat against the wood once installed (use included alcohol swab to clear area first), the map 2 Cliffy goes on top followed by the angle bracket and then the ball guide bracket.
Check out the video below from Buffalo Pinball for how to remove the ship.
Quoted from MiamiRedSkin:Curious - are there known build date ranges that are prone to more issues, or newer build dates that point to factory fixes for things. I am looking at a POTC new in box that was built 2/13/19 - is that any indication of QC?
2/4/19 build here and thankfully no major issues. Even took the ship mini playfield off and back on to install the map hole Cliffys, still no issues.
Had an opto die / break the other day. This one is located closest to The Depths scoop eject. Opto wouldn't respond in test and depths coil kept firing. Each opto is on it's own mini harness and when one goes bad the fix is replacement. Notified my distributor and he's ordered a new one through JJP. First opto I've had go out from my 4 JJP pins.
Quoted from Schabs81:So noticed my map cliffy is raised any ideas on fixing with out removing BP again ?
[quoted image]
Has the adhesive on the Cliffy been removed and was that area of the playfield cleaned before hand with the supply alcohol wipe? That can impact how well it adheres.
Also, theres a post and another bracket (the map 2 Cliffy I believe) towards the back right of your picture that the Cliffy goes under. I believe theCliffy needs to be sitting flush on the wood and then the other two pieces go over it.
Quoted from bbulkley:Exactly. I'm guessing I need to adjust the pearl?
There's a screw below the spot light just to the right of the Pearl that when tightened should lower the ramp down towards the right. That should result in the ball not getting stuck in that spot.
You're currently viewing posts by Pinsider PanzerFreak.
Click here to go back to viewing the entire thread.
Wanna join the discussion? Please sign in to reply to this topic.
Great to see you're enjoying Pinside! Did you know Pinside is able to run without any 3rd-party banners or ads, thanks to the support from our visitors? Please consider a donation to Pinside and get anext to your username to show for it! Or better yet, subscribe to Pinside+!
This page was printed from https://pinside.com/pinball/forum/topic/jjpirates-of-the-caribbean-troubleshooting-tips-issues?tu=PanzerFreak and we tried optimising it for printing. Some page elements may have been deliberately hidden.
Scan the QR code on the left to jump to the URL this document was printed from.
San Diego, CA
Vernon, BC