I'm in, full package with controller
You're currently viewing posts by Pinsider cheshirefilms.
Click here to go back to viewing the entire thread.
Make sure the gap between the two ship pieces, top and bottom, is just right. Enough to allow the lower ship to rock left and back right naturally, not be caught in between the top piece, but also not so high to cause top of ship to be almost impossible to see at all. You'll have to put playfield down entirely to know for sure if that perfect gap has been achieved. While in service position it might appear to work fine but won't when locked back for play it might still stick left. On mine it looked like this when achieved.
20200612_101045 (resized).jpgThe pop bumper caps have changed over the year.
From the stock factory to the mod couple, and now...
See before and after.
Just installed today- the Art of Pinball.
Towers over the previous versions, in both height and quality.
Looks stock- the way it should have been.
Install note: they come with extra long screws to accommodate extra height, so don't install them too tight.
20200811_175221 (resized).jpg20200811_180706 (resized).jpg
20200812_085709 (resized).jpgYou're currently viewing posts by Pinsider cheshirefilms.
Click here to go back to viewing the entire thread.
Wanna join the discussion? Please sign in to reply to this topic.
Great to see you're enjoying Pinside! Did you know Pinside is able to run without any 3rd-party banners or ads, thanks to the support from our visitors? Please consider a donation to Pinside and get anext to your username to show for it! Or better yet, subscribe to Pinside+!
This page was printed from https://pinside.com/pinball/forum/topic/jjp-potc-new-very-detailed-hms-endeavour-ship-top-?tu=cheshirefilms and we tried optimising it for printing. Some page elements may have been deliberately hidden.
Scan the QR code on the left to jump to the URL this document was printed from.