Potc CE &amp;LE shooter (new run sept 2020)

update okt 31

Made a batch of 6 CE and black/good LE each in September that were sold quickly, and made 4 gun metal style SE’s ( or LE) that are up for grabs.
LE/SE 289,- euro’s shipped , CE at 329,- euro

Three left , I reached out to all who applied via PM, one replied back so if you missed the boat I have tried to follow the line.

Probably the last for now, maybe 2020 I do a little run for the marooned few

Ahoy matey’s and thanks all for letting me get into the high 60’s produced with this mod .

Geert

if interested, shoot me a Pm, or email [email protected]
5D0918C0-F8F8-459C-B7A0-A079698DFA22 (resized).jpeg2B0DCA46-F673-42B2-A35D-9A55A853B996 (resized).jpeg4F437AD1-4D3D-4199-889C-57A1A7E7DDF8 (resized).jpegB1CDDBC2-36CB-4126-A290-C90C00CBECD1 (resized).jpeg

Post last edited 3 years ago.

#2 5 years ago

PSW

Psw757

Pinside+ Frequent

11y 117K 7,226 13 48 4

Wow...nice work!

An plans for a LE version?

#3 5 years ago

steigerpijp

Pinside member

Quoted from Psw757:
Wow...nice work!
An plans for a LE version?

Yes, if there’s anyone interested in LE specs, let me know. There’s so many styles that can be produced .

#4 5 years ago

TOM

Crile1

Pinside+ Frequent

Elizabethtown, KY

7y 99,800 2,089 14 31 1

Can you still make a skill shot? Or is it full plunge every time?

#5 5 years ago

WOZ

PanzerFreak

Pinside+ Frequent

14y 123K 12,934 19

Wow, this is ridiculously cool.

Is it possible to use the stock shooter rod and then have the barrel in the game?

#6 5 years ago

PSW

Psw757

Pinside+ Frequent

11y 117K 7,226 13 48 4

Can you post a video of how it works for full and short plunges?

#7 5 years ago

JAH

heni1977

Pinside member

Decatur, IL

11y 89,800 2,529 4 6

WOW! Cool shooter mod!

#8 5 years ago

steigerpijp

Pinside member

Quoted from Crile1:
Can you still make a skill shot? Or is it full plunge every time?

Works just like a standard plunger !

I thought of mounting the gun to the cab and using a trigger switch. That would terminate a pearl or tortuga shot though

#9 5 years ago

WOZ

PanzerFreak

Pinside+ Frequent

14y 123K 12,934 19

Really dig the entire design but concerned about guests using it and how well the pistol piece would hold up.

Interested to hear if we could purchase just the barrel piece and use the stock shooter? Oh, I think I see that that entire grip doesn't move but you pull the lever back to control the plunge?

#10 5 years ago

steigerpijp

Pinside member

Quoted from PanzerFreak:
Wow, this is ridiculously cool.
Is it possible to use the stock shooter rod and then have the barrel in the game?

Ofcourse, then its a one piece mod . I need to see if I can fabricate just the barrel piece and bracket at a reasonable price
Will come back on that option

#11 5 years ago

MKY

Pdxmonkey

Pinside member

12y 170K 7,294

Boom!!
Looks ARRResome!

#12 5 years ago

steigerpijp

Pinside member

Quoted from PanzerFreak:
Really dig the entire design but concerned about guests using it and how well the pistol piece would hold up.
Interested to hear if we could purchase just the barrel piece and use the stock shooter? Oh, I think I see that that entire grip doesn't move but you pull the lever back to control the plunge?

It will hold up wel, its metal and wood. I walked into it full force myself, did more damage to me than itself

#13 5 years ago

MOB

JoinTheCirqus

Pinside member

Lyme, NH

18y 95,300 2,115 1

Fantastic looking.

#14 5 years ago

SKB

Eskaybee

Pinside member

12y 155K 12,952 40

Looks fantastic. But Does it block the outlane escape like shown in the pics?

#15 5 years ago

steigerpijp

Pinside member

Quoted from Eskaybee:
Looks fantastic. But Does it block the outlane escape like shown in the pics?

Ball goes underneath the barrel, so the escape is fully usable.

Thats the thing that stopped me making it so the ball would actually exit the barrel

#16 5 years ago

MDB

Parzival

Pinside+ Frequent

Grand Forks, ND

7y 69,900 716 8 14 3

Very cool! Would love to see a video of it in action!

#17 5 years ago

LAD

Heater

Pinside+ Frequent

Claremont, CA

5y 50,050 285 2

Outstanding! Count me in for a LE one!

#18 5 years ago

GCS

GCS2000

Pinside member

7y 73,550 2,048 4

Holy crap that's cool!

Not sure how well it would hold plus I would need to see how it all works but really impressive work.

This design looks perfect for anyone with a CE, not so much the LE.

#19 5 years ago

FUZ

hawknole

pinball fuzz

North Port, FL

7y 73,050 975 7

OP
Quoted from steigerpijp:
Ofcourse, then its a one piece mod . I need to see if I can fabricate just the barrel piece and bracket at a reasonable price
Will come back on that option

Cool, this could be applied to the Stern POTC as well. I will be watching this thread.

#20 5 years ago

GWL

gliebig

Pinside+ Frequent

9y 119K 5,423

In pending video.

#21 5 years ago

steigerpijp

Pinside member

Quoted from gliebig:
In pending video.

Its just like any plunger action, pull back accordingly and release , but I will try and execute all 3 skill shots on video

#22 5 years ago

JAS

Schabs81

Inactive member

10y 46,050 769 9

I'm in for le

#23 5 years ago

KER

Kerry_Richard

Pinside+ Frequent

Danville, CA

12y 83,900 3,024

I'm interested... I have LE

Maybe just the cannon barrel tho.

Love to see video of it in action.

Thanks
Kerry

#24 5 years ago

DAD

Yelobird

The Mod Couple

Wheaton, IL

20y 160K 10,056 44 37

Looks great does anything keep the gun handle from rotating side to side (OCD) after you pull it back? Or does it just loosely pivot on the shooter rod? And Guess on price as High BOM can be a scary question before committing. Gooks great

#25 5 years ago

BTO

brett

Pinside+ Frequent

Snohomish, WA

8y 103K 625 24 98

Looks really nice, great look for the theme.

#26 5 years ago

KGO

DougPiranha

Pinside member

St Louis, MO

13y 84,900 1,478 5 50

Will it work on a standard?

#27 5 years ago

FRY

FryDaddy

Pinside member

Kansas City, MO

5y 29,400 82 1 6

I too would like to see it in action and also the price.

#28 5 years ago

steigerpijp

Pinside member

Hi everyone,

I sent out e-mails and/or pm’s back to hopefully all who enquired for a CE shooter kit.

If I missed anyone, let me know .

Aiming at CE kits first, and filling up what is left of the remaining 14 replica pistols I have been able to aquire at short notice here in Europe with LE orders.

Kit is marked at 300 euro’s as it stands .

I have no idea yet of lead time, and am not asking any money upfront either, in case it takes too long. but this batch will give me a good time indicator for future.

Wish me luck , and thank you to all who have shown support !

Geert

#29 5 years ago

GCS

GCS2000

Pinside member

7y 73,550 2,048 4

Awesome job but I think this one is too far out of my budget even thought it is cool as ****

#30 5 years ago

DNA

dnaman

DNAMAN

10y 83,850 1,863 26

Now switch this pull plunger out with a fixed gun with a trigger based ball launch (potentiometer and coil) and that would rock even more for me.

Beautiful work OP!

#31 5 years ago

steigerpijp

Pinside member

update 29/3

Received a batch of pistols this week , and chopped, gutted, filled and milled them to drilling and threaded for the lengthened rods ..

Bigger batch didnt save much time

Hopefully beginning next week I should have the first CE kits out.

And a solution also for just the shooterlane barrel cover .
Solid resin cast , painted , plug and play, 99 euro’s

And a possible LE handle , the ivory one

Thanks again to all who ordered , Geert

A10F6933-1AD3-4E37-95E9-003DA8DDFA82 (resized).jpeg

4B42BE43-2D90-4A33-9D6E-F7E91C011550 (resized).jpeg

B7D34B91-DE85-4320-B18E-5D02FBDF377E (resized).jpeg

A8E30FFA-C87B-443D-85B8-2B56F4BEE8D6 (resized).jpeg

CBF7FFF5-0B0B-4864-82F9-E3BF32567B23 (resized).jpeg

ABD49710-F871-46F6-B568-3F7410C87DBF (resized).jpeg

A4A1802B-113C-4372-95CD-163E4B291848 (resized).jpeg

FB8F4318-F439-440B-A9E2-23FAC204DDE1 (resized).jpeg

26116280-8CEE-4E9D-B6BA-AD63782AB9E6 (resized).jpeg

#32 5 years ago

DNA

dnaman

DNAMAN

10y 83,850 1,863 26

That irovy one is sweet!

I wonder if there will be difficulty shipping these, being that they look like a gun and all...

#33 5 years ago

HEY

indypinhead

Pinside member

12y 119K 6,376

That's a really cool looking mod.

#34 5 years ago

steigerpijp

Pinside member

First set of CE’s are done !

Shipping them asap this week

34949477-66EE-4992-860A-F8C050B6587A (resized).jpeg

7FDC80E6-CDCA-47F7-A4E5-C02513E3DDB9 (resized).jpeg

46729262-9156-45CE-8B69-3B28E610CA2D (resized).jpeg

89C61322-1554-4825-8187-F7A99631AB3A (resized).jpeg

73EDA8A7-74AD-4D6B-9CB3-FF42D4E219F4 (resized).jpeg

7C8A5452-FC93-486F-BC56-17F8DC684F7C (resized).jpeg

B7A788A0-9DAD-490E-80F9-71242B024C86 (resized).jpeg

D2B69710-F913-48E3-9DB6-C949128327EE (resized).jpeg

#35 5 years ago

PSG

PeterG

Pinside member

Looks stunning. Great work.

#36 5 years ago

steigerpijp

Pinside member

Update:

The first CE shooters are underway to their new owners, and setting up parts for more to follow.

I got my hands on some cool pistols that it now looks like are no longer being produced.. Damn!

So for following LE orders, I will fall back on the original models also used for the CE , but in blackbeard black, and weathered brown. Options of gun metal or brass barrel and fittings

Should have those ready for showing in a week or two .

Pricing is 250,- for shooter and inner barrel kit

What I have in the pictures is part spoken for but they are available . The black one with the beads on the handle bottom is gone and so is the ivory handle

If you like one of them let me know, they are gone and them done!

74A86486-7FD5-4AEA-B76A-37F71AAC6163 (resized).jpeg

C5AAE007-7E9D-45BA-B5CB-4978CCFDA330 (resized).jpeg

66841E91-3D25-4039-975F-E65792F7C91B (resized).jpeg

70C02630-051E-4DC3-AF6B-4CD076523718 (resized).jpeg

CA5E0D39-AB85-4227-BCEF-00E247F5731C (resized).jpeg

F7D4DF8B-1A23-426F-938D-B849DCAFD8EA (resized).jpeg

#37 5 years ago

BAD

BC_Gambit

PinMod Industries

Unknown

11y 70,550 3,532

Beautiful mod!

I may add one to my game someday, but I should pay it off first

Did you ever figure out a price just for the barrel?

#38 5 years ago

steigerpijp

Pinside member

Quoted from BC_Gambit:
Beautiful mod!
I may add one to my game someday, but I should pay it off first
Did you ever figure out a price just for the barrel?

Yes, the barrel is 99,- solo .

Paying it off is wiser than buying this for sure

1 week later

#39 5 years ago

steigerpijp

Pinside member

New batch CE and LE

(Info at first post)

9CC9ED86-05CC-428F-A1E8-46C6E02A9CEC (resized).jpeg

DDCD44D1-52A4-4B2B-97AA-C3DD023A3049 (resized).jpeg

4278C591-B4E2-4564-8385-33525694E729 (resized).jpeg

D80BEC15-9A65-4CF0-A48A-1E324FB9E301 (resized).jpeg

E5DAE4FB-051E-4131-A51A-F8DCC1A5696F (resized).jpeg

DA36197F-1F07-42DB-8929-D9CD40CF2DE5 (resized).jpeg

#40 5 years ago

DJB

delt31

Pinside+ Frequent

Pittsburgh, PA

8y 159K 12,566 12 7 3

sick

#41 5 years ago

PSW

Psw757

Pinside+ Frequent

11y 117K 7,226 13 48 4

Can someone post some pics of one of these installed on a LE?

Preferably a darker color handle.

#42 5 years ago

steigerpijp

Pinside member

Quoted from Psw757:
Can someone post some pics of one of these installed on a LE?
Preferably a darker color handle.

Any pics installed from this set will be hard , as none have gone out yet...
I will ask for some pics of the 3 proto LE’s that got sold. All black /dark.

Or those buyers might post themselves

#43 5 years ago

PSG

PeterG

Pinside member

I have a dark one on my Stern POTC. Had to adjust the barrel due to my custom apron.

20190416_222643 (resized).jpg

20190416_222656 (resized).jpg

20190416_222705 (resized).jpg

20190416_222724 (resized).jpg

#44 5 years ago

PSG

PeterG

Pinside member

Double guns, double fun

20190416_222739 (resized).jpg

1 week later

#45 4 years ago

MKV

Nepi23

Pinside member

Helsinki

11y 70,800 1,924 7

Received my shooter rod today. A million thanks to steigerpijp!

The shooter rod is terrific and really impressive craftmanship. The pics do not do justice for the shooter rod, its that nice!

#46 4 years ago

KER

Kerry_Richard

Pinside+ Frequent

Danville, CA

12y 83,900 3,024

Does the handle tend to stay down, or does it want to rotate sideways?

#47 4 years ago

PSG

PeterG

Pinside member

Mine tends to stay down. It is heavier at the bottom.

1 month later

#48 4 years ago

WIK

MarZ_78

Pinside member

Cedar Falls, IA

5y 46,300 114 3 7

This is too cool. Great job steigerpijp !

If you're on the fence about buying one... I'll just say this is might be the coolest mod out there next to pin stadium lights.

20190603_170104 (resized).jpg

15595999073828342556967139978237 (resized).jpg

2 weeks later

#49 4 years ago

steigerpijp

Pinside member