Quoted from paulbaptiste:Help LTG
Goes where the green arrow points. When soldered back on please test in Tests - Switches Matrixed.
Don't forget to call jjp and tell them to get LTG : ) back.
e06c12f005578828f085462a1ef85f2fbbcbb13e (resized).jpgQuoted from paulbaptiste:Help LTG
Goes where the green arrow points. When soldered back on please test in Tests - Switches Matrixed.
Don't forget to call jjp and tell them to get LTG : ) back.
e06c12f005578828f085462a1ef85f2fbbcbb13e (resized).jpgQuoted from LTG:Goes where the green arrow points. When soldered back on please test in Tests - Switches Matrixed.
Don't forget to call jjp and tell them to get LTG : ) back.
[quoted image]
Absolutely! Thanks for all your help! Best tech in the business!!
Quoted from LTG:Goes where the green arrow points. When soldered back on please test in Tests - Switches Matrixed.
Don't forget to call jjp and tell them to get LTG : ) back.
[quoted image]
Soldered and put back together, same issue. Their should be two green wires on the load target correct?
Quoted from paulbaptiste:Absolutely! Thanks for all your help! Best tech in the business!!
Hang on. I made a mistake.
It goes to the red arrow.
Sorry. Hope you didn't put the black pearl back in yet.
721bd61e32cfe7f1183fb0082ba54f53cc8c2362 (resized).jpgQuoted from paulbaptiste:Soldered and put back together, same issue. Their should be two green wires on the load target correct?
I am sorry about that. I started checking pictures and realized I made a mistake.
LTG : (
Haha!! That’s where I had it in the beginning!! No worries. I’ve gotten good at taking the upper playfield off. Don’t unplug anything or remove any ramps at all. Just the plastic and the scoop.
Here we go again!
Quoted from paulbaptiste:Haha!! That’s where I had it in the beginning!! No worries. I’ve gotten good at taking the upper playfield off. Don’t unplug anything or remove any ramps at all. Just the plastic and the scoop.
Here we go again!
Error free again my friend. Thanks for your help. Email incoming!
594E824E-DF3E-4C7C-8E9D-3DAC00FBF5BC (resized).jpegQuoted from Betelgeuse:Does anyone know of a good source for a plastics protector set?
If anyone else needs plastics protectors, I ended up getting a set from Mezel Mods.
Joined the Beta group today. Was not too difficult to get it going. Jjp is very active and responsive on the telegram group.
Quoted from Mrsiyufy:Joined the Beta group today. Was not too difficult to get it going. Jjp is very active and responsive on the telegram group.
I’m definitely considering joining. I was waiting thinking the update was coming soon because of the Beta being available. I was wrong
Quoted from Green-Machine:I’m definitely considering joining. I was waiting thinking the update was coming soon because of the Beta being available. I was wrong
After you join Telegram you will have access to the beta. Beta installs the same as .99 (instructions on JJP website). After updating you’ll need to install a dongle and set up WiFi in the games menu. There is a critical update via WiFi you need. opt in to the beta and opt into updates before the download will work for updates. All of this is a few menus deep and a little tricky since you are using flippers and start button to enter the commands for some of it.
Quoted from Mrsiyufy:After you join Telegram you will have access to the beta. Beta installs the same as .99 (instructions on JJP website). After updating you’ll need to install a dongle and set up WiFi in the games menu. There is a critical update via WiFi you need. opt in to the beta and opt into updates before the download will work for updates. All of this is a few menus deep and a little tricky since you are using flippers and start button to enter the commands for some of it.
Thank you for the nice explanation! You rock!
Quoted from jdlang11:Does anyone think that a company would re-make the plastic ramps one day?
I can find a whole set for WH20.
I need some asap. Mine are cracked.
Quoted from jdlang11:I need some asap. Mine are cracked.
I'm in the same boat.....so to speak . Would love to find a set
Quoted from Mrsiyufy:I too would take a set. Is there anyone out there that would make a run of ramps ?
Extra is good. Starship fantasy makes a really quality ramp for Totan. Wonder if someone could reach out to them to see how they feel about making some sets for PoTC
Quoted from Green-Machine:Extra is good. Starship fantasy makes a really quality ramp for Totan. Wonder if someone could reach out to them to see how they feel about making some sets for PoTC
I’m sure we could easily get 25 people that would be in on an order
Quoted from Mrsiyufy:I’m sure we could easily get 25 people that would be in on an order
I'm in!
Quoted from Mrsiyufy:I’m sure we could easily get 25 people that would be in on an order
I'll start calling Starship Fantasy on Monday. Then Tuesday. Then...until they cave in. Haha (in sinister voice)
Quoted from Mrsiyufy:I’m sure we could easily get 25 people that would be in on an order
I’d be in as well!
Just sent Starship Fantasy a PM inviting them to come take a pole for interested buyers here on this thread. Hopefully they will be willing to take on this project.
I'd be in for some ramps! Mine are still ok, but I sweat a little every time the ball rattles hard on a failed ramp shot.
Which ramp are you guys getting cracking on, Maelstrom or the ramp leading to the ship? I've got close to 2K games on my SE and not seeing any issues yet, thank god.
Quoted from LOTR_breath:Sur quelle rampe êtes-vous en train de craquer, Maelström ou la rampe menant au vaisseau ? J'ai presque des jeux 2K sur mon SE et je ne vois pas encore de problèmes, Dieu merci.
I have no problem with my ramp after 2500 games but I too am afraid when I hit the multipliers. Two ramps in reserve and I would be more serene.
Quoted from LOTR_breath:Which ramp are you guys getting cracking on, Maelstrom or the ramp leading to the ship? I've got close to 2K games on my SE and not seeing any issues yet, thank god.
My is not from gameplay. Maelstrom is from aggressive cleaning. The other is at the screws.
Quoted from jdlang11:My is not from gameplay. Maelstrom is from aggressive cleaning. The other is at the screws.
So I really take my time now.
Could someone with a caliper measure the thickest part of the ramp? I do not understand why they are breaking soooo soon. I'm gonna talk to JJP.
Quoted from lrosent345:Could someone with a caliper measure the thickest part of the ramp? I do not understand why they are breaking soooo soon. I'm gonna talk to JJP.
They are sooo thin in some areas !
Quoted from lrosent345:Could someone with a caliper measure the thickest part of the ramp? I do not understand why they are breaking soooo soon. I'm gonna talk to JJP.
To be fair I have the kraken addition and I smacked it onto the edge where it rests when cleaning. But I would also like extra. WH20 I have extras waiting.
Yes for Ramps.... and especially for yours starshipfantasy ! Dont forget about stickers and maelstroom exterior sticker instead of white...
I don't know about stickers until I talk to JJP. I need their permission to make the decals but not the ramp.
Quoted from Mrsiyufy:Joined the Beta group today. Was not too difficult to get it going. Jjp is very active and responsive on the telegram group.
Where does one join the Beta group?
Quoted from Millz:Where does one join the Beta group?
Download telegram on your computer, phone or tablet and once you are on the app - search for Keith Johnson or Joe Katz and ask one of them to add you to The beta group
Quoted from Mrsiyufy:Download telegram on your computer, phone or tablet and once you are on the app - search for Keith Johnson or Joe Katz and ask one of them to add you to The beta group
Download the app, but cannot find either Keith Johnson or Joe Katz, any additional guidance appreciated.
Quoted from Millz:Download the app, but cannot find either Keith Johnson or Joe Katz, any additional guidance appreciated.
Email your telegram user name to [email protected] and ask to be added to the group
Quoted from lrosent345:I don't know about stickers until I talk to JJP. I need their permission to make the decals but not the ramp.
Thank you for reaching out to us! Very much appreciated
Wanna join the discussion? Please sign in to reply to this topic.
Great to see you're enjoying Pinside! Did you know Pinside is able to run without any 3rd-party banners or ads, thanks to the support from our visitors? Please consider a donation to Pinside and get anext to your username to show for it! Or better yet, subscribe to Pinside+!
This page was printed from https://pinside.com/pinball/forum/topic/jjp-pirates-of-the-caribbean-official-owners-and-fan-club/page/354 and we tried optimising it for printing. Some page elements may have been deliberately hidden.
Scan the QR code on the left to jump to the URL this document was printed from.