#5 issue- Is the shipping block removed from back of PF?
When I put my PF back in it is a little tight and rubs the corrugated tubing. So I gently rock it as I go down using the apron under the lcd as a hand hold. That helps me any way.
And yes to @f3honda4me answers.
I installed the silencer kit and it helped a lot!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!
Mine really load. I play with the volume at 22 which is pretty load with a external sub. I could still hear it spinning was driving me nuts!
So I got the Mod Couples silencer kit and installed and until I got used to it, I did not even know it was spinning!
Definitely a must if yours is loud. It is a easy mod to do and the instructions were perfect, with a touch of comedy in them!!!
Looks like it is moving good. You can go into system test and find the ship test and calibrate it. I am pulling up the manual now on it.
The mylar for the lock bar keeps your rails from scratching.
I believe the rounded mylar is for the chapter start area.
When putting key posts at the beginning of the thread, does this need to be done by the op?
We could definitely use some more key posts since this thread is becoming longer by the minute!!
The mylar I remember being discussed, just was not sure where everyone was putting the pieces. I did know of the one for the vuk for the
I do not intend to start another thread. I just think there needs to be more key posts for this one. So others can navigate easier.
Yes your slings are above your flippers, you also have one under the ramp to the pearl.
I went with titan bands for the flippers, JJP did use some titan rings for some stuff but not flippers. This was direct from titan as I emailed them.
Got my star posts on! I like them much better then the plain post. I guess I am just old school like that.
Actually looked really good under them, and were not tight at all.
Only 407 plays though.
I had mentioned way back in this thread about some side armor. I thought it would be cool to have the ones that go around the flippers.
Front legs all the way in
Back legs raised to meet second line
4 ft level across
And i am
My first with felt too!
I just make them tight. Probably a full turn after snug ,if that makes sense.
I tighten them again after about a month. And then randomly after that.
I can not stress this enough! Anyone who owns this pin need's to go to the JJP site and go to support, downloads, and look at the manual. There is a lot of info in it and will help you to familiarize yourself to the inner workings. They did a great job with this manual!!!
But being a service technician (mechanic) I have a lot of tools any way. I did just build this little rotisserie.
Quoted from GnarLee:
No way. I just rebuilt one of those guys
Yep me and waderade812 are working on our rebuilds now. cletus finished his up a month or so ago. You should check out cletus thread.
It is Awesome.
I made it to the curse of the black pearl wizard and had arrrrrg frenzy going. Drained in like 5 seconds
Quoted from Tuna_Delight:
noisiness of my spinning disk.
Wow, I noticed a ton of difference! Can still hear it if I am listening for it. But as far as game play, with volume at 19, I don't even notice it now!
Quoted from harryhoudini:
IMHO that doesn't look so hot
I agree, can't believe that's what their fix was!
I tried to update last night and did not go so well. I did use unibootin and I feel like it was down loaded correctly (following the instructions from manual). But when I installed in port and turned game on nothing happened. Let it run for 20 mins just to be sure. Nothing, which one of these am I supposed to use. I will retry again this afternoon.
I did use the full install USA one
Yep i think the file did not load. It now says pirates of the Caribbean iso. Where it did not say that before.
Quoted from Psw757:
pirate themed attract mode..
I totally agree with you. I was hoping there would be something in this update. I could care less about the JJP theme song, while cool it does this pin no justice, and does not play in attract mode anyway. This will be their GOAT for a long time. IMO
Its cheaper for me to just buy two cases of beer and have my friends help me carry it down.
I think he is working on it! I am expecting a great mod, that's why it's taking so long! But my wife says nothing will beat the dog barrel light cover.
Cliffy’s on the way. I always recommend cliffy for your pin. Great person to deal with!!
Don't forget if you have not already, get in there and rate this pin. It should be in the top 5 for sure!!!
And I think this thread will be a 20k by Christmas!
Got the BP deck mod in from mezel mod, super sweet! Really completes the top. Now if we can get something like this to complete the BP.
I also turned down my ship VUK to 19 and sounds much better as well as saving a opto.
Got my cliffy's in yesterday as well. Have to wait for a good whole day off to do this one as I will also do a full cleaning.
Other then that, the pin is holding up well and still being enjoyed. My poor Star Trek prem is now being neglected though!
Just wondering if the neco series 1 jack will work for the spinning pop upgrade?
Quoted from arzoo:
Did your mod come with printed instructions? If not, are the instructions posted anywhere?
Easy to follow instructions!
Quoted from Rdoyle1978:
Yeah! Is there any attract music at all?
There is when the JJP logo comes on. It is just the JJP song though, it does not really go with the concept. It plays I think once every 4 rotations like the Wanted posters! I do think they need to bring this back to life, as attract songs are pretty flipp'n awesome! If you have heard some of the older ones, like 80's era and 90's. I think this is a key part of pinball in my opinion.
I don't know if this is a win or not?
When your wife get's to plunder a ball from you and she say's, Why do I need a extra ball when I have both of your's in my purse!
darkryder yes that is the kit. I also got the Anarchy 8 way pcb splitter from pbl. Since I like the led’s it works well for other powered mods too!
I need to look back and see who does the lighted shooter housing. Thanks evh347 for answering the question on mustangpaul cool leg light ups!
beatmaster does the led shooter housing.
Great to see you're enjoying Pinside! Did you know Pinside is able to run thanks to donations from our visitors? Please donate to Pinside, support the site and get anext to your username to show for it! Donate to Pinside