Quoted from Zora:I am very interested to understand how you plugged the speakers in, especially the 2 way speakers. For the external sub I use alligator clips and an activ sub. Do you do this similarly or is there a direct plug in possibilty for the sub as well.
Would you share your solution. Thanks a lot!
I desoldered the wires from the internal speakers and soldered the source wires to new speaker wires that I ran down into the cab, out the hole in the bottom, and back up to the top.
For the speaker boxes, I soldered a short wire to the speakers and ran those out the hole in the box, and soldered that end to the spring terminals.
If you leave the tweeter wires soldered then just unplug them.
I bought the 4" speaker boxes off ebay. They have a hole in the box for wires but not terminals, so I also bought the spring terminals off Ebay. $34 for those items plus the speakers, which I already had.
I would've bought boxes for the 5" midrange and just relocated them, but they don't sell boxes for that size.
20190427_173925 (resized).jpg