Quoted from PinMonk:I've posted the spec sheet for it (reposted below, just click on the PDF), but the thresholds are set per switch order batch, so it's not configurable once it leaves the factory - the temp is set. That temp cutoff for a specific switch is on the casing. It looks like GnR is 85C/185F for the cutoff. They usually turn back on again once it drops like 20F.
Honestly, cooling the coil is the long-term answer so it never triggers the heat cutoff. With active cooling in my testing, the temp stays in the 120F or less range most of the time and never gets close to 185F. My add-on kit for that is almost done or you can DIY one.
[quoted image]
Please post here when available PinMonk