Guns N' Roses (CE)
Jersey Jack, 2020
Guns N' Roses (LE)
Jersey Jack, 2020
Guns N' Roses (SE)
Jersey Jack, 2020You're currently viewing posts by Pinsider pinball-nja.
Click here to go back to viewing the entire thread.
The plaque on the front of the pin is numbered out of /500?
How can you make more?
They will more then likely make a superior version to all of these and it will be more then 13k?
Ooooooooor maybe they stay true to the name of the tour???
Quoted from pinballaddicted:I agree with you and that is why I think JJP should just make more CEs. There are too many unhappy campers.
Did you remove the plaque signed by the band?
Quoted from wcbrandes:007 in the house and dialed in thanks to my good bud Angelo!
[quoted image][quoted image][quoted image]
Is this for the shooter rod, if it’s sitting behind the auto plug?
I’ve had a lot of difficulties with my shooter rod hitting the ball properly and I was just about to take it apart
Question:
Played a game just before work,
Didn’t realize at first, but it seems the slash spinner dropped in my unit.
At first it looked like the ball was just sitting on the lip, but closer inspection, the spinner dropped.
I shut the game off and headed out, but wondering what I should be looking for when I lift the hood? Has this happened before?
Thanks I’m advance.
That’s exactly what it is.
Thank you LTG
So do I pull the coil shaft back a bit then reinstall?
Thanks. Easy fix.
Thank you LTG
So maybe the spring isn’t the issue?
Seems like the shooter rod barley touches the ball.
Either the auto shooter claw is too close, or the shooter rod is having troubles touching the ball.
Quoted from zaphX:Looks like it to me!
I’ll give this a try tonight
Do I need to remove the skull?
Quoted from wcbrandes:I was having this problem and it was simply adjusting the whole shooter Rod mech from inside. I loosened the screws and pushed down on the shooter rod and re tightened. perfect now. seems the top was rubbing up against the mech for auto shooter.
Seems stuck in this update every time I turn on?
Is there a way to just exit the update and play as is?
I can’t seem to figure out how to extract the file.
I downloaded it, but the utility program seems to be giving me trouble
Quoted from LTG:If you can turn the game off. Power back up, and the game is fine. Then try a USB update.
LTG : )
Mac user,
It’s stuck in the wifi mode.
Quoted from PinMonk:Are you windows or mac?
Removing the USB drive should allow you to boot into the old version, unless you were doing a wifi update, maybe?
I’m plugging into the cord in the coin box.
The format is MS-DOS
But I don’t see a
1b option for “master bootrecord”
Also,
Do I name the USB “JJPUSB” ?
While it’s being erased?
Quoted from PinMonk:Did you do this step EXACTLY:
"Click "Erase" button
1. Set the format to "MS-DOS(FAT)"
1a using scheme "Master Boot Record"
1b with name "JJPUSB""
Master Boot Record is important because if you're not using that mode when you format on that step, the USB won't boot in the pinball machine.
Did you check your boot order in the BIOS?
What size and brand USB drive are you using?
Is your USB drive plugged into the USB extension cord or directly in the back of the computer in the backbox?
I will make a photo of the screen and check the connection in box. Thank you.
Quoted from PinMonk:If you're not setting a master boot record option, you're not making a bootable USB. I didn't make Mac instructions, but people that have followed them EXACTLY have had success. Maybe post a screenshot of the "erase" box so I can see what you're seeing?
Also, did you check to make sure that your USB extension cable is firmly connected to the computer in the backbox on the other end?
PinMonk thank you for your help.
I’m gonna delete and download the file again.
Quoted from PinMonk:That looks right. It says the partition scheme is master boot record and you have the name right. You've formatted it to MSDOS-Fat, too.
Did you open the ISO and copy the files to the root of the USB drive now?
Yes I did. I pilled the lcd out and made sure all black cables were attached firmly,
I will attempt again tonight.
Quoted from PinMonk:Did you make sure the USB extension cable is plugged in tightly at the computer in the head?
Crisis adverted, I was able to reconnect to the wifi and give the download another try.
Success.
Thank you folks.
ThNk you for your time and patience
LTG also
Quoted from PinMonk:Woohoo!
LTG how do I get into juke box mode?
Thank you in advace.
For the Canadians, I can use my US address then have them sent up. And I’ll ship out.
Quoted from zaphX:Ah sorry buddy. Yeah I really don't want to mess with international, just acting as in import destination for US people as I can send them back out with relatively low pain.
Interesting. Thanks.
I’m about to go check mine now.
Quoted from Dallas_Pin:I’ll be checking one band members game soon ... I’ll report back
You're currently viewing posts by Pinsider pinball-nja.
Click here to go back to viewing the entire thread.
Wanna join the discussion? Please sign in to reply to this topic.
Great to see you're enjoying Pinside! Did you know Pinside is able to run without any 3rd-party banners or ads, thanks to the support from our visitors? Please consider a donation to Pinside and get anext to your username to show for it! Or better yet, subscribe to Pinside+!
This page was printed from https://pinside.com/pinball/forum/topic/jjp-game-6-collector-s-edition-?tu=pinball-nja and we tried optimising it for printing. Some page elements may have been deliberately hidden.
Scan the QR code on the left to jump to the URL this document was printed from.
Toronto, ON
Sacramento, CA