(Topic ID: 193356)

JJP Changed to 12v power for Bill Acceptors on Dialed In


By vireland

1 year ago



Topic Stats

  • 59 posts
  • 14 Pinsiders participating
  • Latest reply 4 months ago by LTG
  • Topic is favorited by 1 Pinsider

You

Linked Games

Topic Gallery

There have been 6 images uploaded to this topic. (View topic image gallery).

05AA0033_CM120_CM360_Female__44102.1446141847.1280.1280 (resized).jpg
60245ffb620da584b48087b5f04c6f50f5262d70 (resized).jpg
DSC00594 (resized).JPG
1 (resized).JPG
IMG_20170714_152800 (resized).jpg
IMG_20170714_152654 (resized).jpg

There are 59 posts in this topic. You are on page 2 of 2.
#51 9 months ago
Quoted from LTG:

You mean like this ?
You can see the numbers on the connector or find it on line. They are :
Locking tab on top of connector
1 2 3
4 5 6
7 8 9
Bottom of connector
#5 - Red Wire
#9 - Brown Wire
#7 - Blue Wire I think, might be #8 Purple
LTG : )

Yep, just like that. Now all I need to do is figure out which of those wires is which. If I put my red wire on #5, my brown on #4, that makes my black ground go on the blue or purple one? I dont want to mix up the ground and power or vice versa. Sorry if Im having trouble visualizing this.

#52 9 months ago

This is the female end that would be from the bill validator and go to plug into the male end of the cable in the game.

Quoted from djoverpour:

I dont want to mix up the ground and power or vice versa. Sorry if Im having trouble visualizing this.

Call them and ask, I believe ground goes to #9

LTG : )

DSC00594 (resized).JPG
#53 9 months ago

I think this one is the one I need. It has 12v on 5, credit on 7 &8, and ground on 9. This has the center pinout like you mentioned in your first post.

http://shop.pyramidacceptors.com/cm120-cm36-female-receptacle-apex-05aa0033/

Does that look better? You're the man for all the help, thanks again.

EDIT: Here is the pinout for the Mars machine. It appears that 5,7,8,&9 are the pins I need and that adapter above looks like theyre in the right place.

60245ffb620da584b48087b5f04c6f50f5262d70 (resized).jpg

05AA0033_CM120_CM360_Female__44102.1446141847.1280.1280 (resized).jpg
#54 9 months ago
Quoted from djoverpour:

I think this one is the one I need. It has 12v on 5, credit on 7 &8, and ground on 9. This has the center pinout like you mentioned in your first post.

http://shop.pyramidacceptors.com/cm120-cm36-female-receptacle-apex-05aa0033/

Looks like it.

I'd call them and ask if they have any experience hooking that harness to a pinball machine. Your earlier post mentioned you only needed three wires according to them.

LTG : )

#55 9 months ago
Quoted from djoverpour:

I think this one is the one I need. It has 12v on 5, credit on 7 &8, and ground on 9. This has the center pinout like you mentioned in your first post.

http://shop.pyramidacceptors.com/cm120-cm36-female-receptacle-apex-05aa0033/

Look inside the connector, it looks like it has pins at #2, #5, #7, and #9

I don't think it will work.

LTG : )

#56 9 months ago
Quoted from LTG:

Look inside the connector, it looks like it has pins at #2, #5, #7, and #9
I don't think it will work.
LTG : )

Hmmmm, do you think its the angle? The Pyramid plug is a female so its pin 1 is on the top left of that image I think. The male in the image above has the clip on top as it connects with the other piece. I dont think the clip on the female goes on top cause it wouldnt snap shut. If that makes sense

#57 9 months ago
Quoted from djoverpour:

do you think its the angle?

There is still only four pins inside that female connector, and it just doesn't look in the right spots to me other than the center one for power.

Best call them and ask.

LTG : )

5 months later
#58 4 months ago

What's the latest on 12v BA? Mars is soooo expensive. Anyone find anything cheaper? (Without having to wire your own harness?)

#59 4 months ago

Pyramid.

Used ones on Ebay.

Things like that.

Just remember stackerless of stacker for 300 notes or less or they won't fit JJP, CGC games.

LTG : )

Promoted items from the Pinside Marketplace
$ 8,000.00
$ 76.95
Cabinet - Shooter Rods
Super Skill Shot Shop
$ 45.00
Gameroom - Decorations
Pinball Photos
From: $ 40.00
Cabinet - Other
Rock Custom Pinball
$ 55.00
Gameroom - Decorations
Pinball Photos
$ 399.95
$ 239.00
Cabinet - Toppers
Tilttopper
From: $ 20.00
Cabinet - Other
Rock Custom Pinball
$ 55.00
Gameroom - Decorations
Pinball Photos
$ 50.00
8,500 (Firm)
Machine - For Sale
Fruitland Park, FL
From: $ 5.00
Cabinet - Other
Rock Custom Pinball
$ 49.00
From: $ 24.00
7,800 (OBO)
Sale Pending!
Jackson, MI
From: $ 40.00
Cabinet - Other
Rock Custom Pinball
$ 9,000.00
Pinball Machine
Operation Pinball
From: $ 20.00
Cabinet - Other
Rock Custom Pinball
$ 10.00
Cabinet - Sound/Speakers
Gweem's Mods
Wanted
Machine - Wanted
Danville, VA
$ 9,000.00
$ 21.00
Hey modders!
Your shop name here
There are 59 posts in this topic. You are on page 2 of 2.

Hey there! Got a moment?

Great to see you're enjoying Pinside! Did you know Pinside is able to run thanks to donations from our visitors? Please donate to Pinside, support the site and get anext to your username to show for it! Donate to Pinside