(Topic ID: 349586)
Linked Games
Jaws (LE)
Stern, 2024-
Jaws (Premium)
Stern, 2024
-
Jaws (Pro)
Stern, 2024
Topic Gallery
Edinburgh
Pottstown, PA
Another cool Jaws pinball banner design if you want something different. 24 x 62 inches, with the four corner grommets, and made from heavy 16 ounce vinyl. Can be ordered from my Pinside store with the link below. $100 plus shipping. Cheers.
https://pinside.com/pinball/market/shops/1505-duke-pinball/10439-jaws-pinball-banner-24-x-62-heavy-vinyl
pasted_image (resized).png
Quoted from Cento:Can't wait for these to come out
[quoted image][quoted image]
Whomever is doing these should use the same design for a new Orca facade on the upper playfield on the premium/LE these look so nice! If that facade was made to look like this it might look more boat like then it does now.
Quoted from Cento:Can't wait for these to come out
[quoted image][quoted image]
Should be ready to show this week! That shooter plate is part of larger custom set for the pro, prem and LE.
Quoted from AndHart120:Whomever is doing these should use the same design for a new Orca facade on the upper playfield on the premium/LE these look so nice! If that facade was made to look like this it might look more boat like then it does now.
That is the idea! It will be all part of a custom playfield set. Should be ready to show it this week.
Quoted from CRCades:That is the idea! It will be all part of a custom playfield set. Should be ready to show it this week.
Excellent!!!
Quoted from AndHart120:Excellent!!!
Ok, I’ll give you a look at one of the major parts of the JAWS Custom Detail set early.
I’ll have one for you Pro owners as well!
48704B36-2D14-46B5-8187-17DF6166B2B2 (resized).jpegQuoted from CRCades:Ok, I’ll give you a look at one of the major parts of the JAWS Custom Detail set early.
I’ll have one for you Pro owners as well!
[quoted image]
Sweet! Take my money
Quoted from Cento:When will this set be available?
I’m expecting to launch the full set by the end of the month. Once I get closer after this week I will open a list for anyone interested.
Quoted from Cento:These are a must for anyone working their machine or adding mods!
[quoted image]
Actually, these do the exact same thing for a bit over $1 each at Harbor Freight.
Screenshot 2024-03-05 at 14-15-27 1-3_4 in. Nylon Spring Clamp (resized).pngQuoted from CRCades:Ok, I’ll give you a look at one of the major parts of the JAWS Custom Detail set early.
I’ll have one for you Pro owners as well!
[quoted image]
It's a little difficult to tell for sure from this angle, but it looks like all of the shark jaws are upside down.
How?
I want to learn.
Quoted from CapeCodPin:Actually, these do the exact same thing for a bit over $1 each at Harbor Freight.
[quoted image]
Quoted from Ercon:It's a little difficult to tell for sure from this angle, but it looks like all of the shark jaws are upside down.
Aw man, you’re no fun! This was an early paint test mock-up and yes they were upside down. Didn’t think anyone would even come close to spotting it let alone be within the first few hours!
Brody's Blazer is on the road! To me this is the only logical place to put it. Just a little plexiglas and double sized tape. Unfortunately it fell off when I lifted the playfield, but it'll do for now. Maybe one of you modder 3D printing guys can come up with something better?
IMG_4205 (resized).jpegIMG_4206 (resized).jpegIMG_4207 (resized).jpegQuoted from CRCades:Aw man, you’re no fun! This was an early paint test mock-up and yes they were upside down. Didn’t think anyone would even come close to spotting it let alone be within the first few hours!
Sorry, as a lifelong Florida shark fisherman, and a huge collector of Jaws, they just jumped off the page at me.
FB_IMG_1708887765098 (resized).jpgQuoted from Ercon:Sorry, as a lifelong Florida shark fisherman, and a huge collector of Jaws, they just jumped off the page at me.
[quoted image]
I should have guessed you were a collector of sorts and in FL which is huge on sharks. This MUST be a dream title for you! I’m loving it!
Quoted from CRCades:I should have guessed you were a collector of sorts and in FL which is huge on sharks. This MUST be a dream title for you! I’m loving it!
My LE will be delivered on Thursday!!
Quoted from Apollo18:How?
I want to learn.
Do this on both sides. Cary Hardy has a YouTube video about it too.
Quoted from Cento:These aqua colored posts are going to look awesome in Jaws!
[quoted image][quoted image][quoted image]
Pics after install would be great.
Quoted from GoneFishinLvMsg:Brody's Blazer is on the road! To me this is the only logical place to put it. Just a little plexiglas and double sized tape. Unfortunately it fell off when I lifted the playfield, but it'll do for now. Maybe one of you modder 3D printing guys can come up with something better?[quoted image][quoted image][quoted image]
If the plexi is staying in place over the lane, the blazer can be set with a drop of clear Gorilla glue on each tire. Will look neater and hold a helva lot better.
Quoted from wolffcub:[quoted image]
Whoaaa!
Quoted from Ercon:Sorry, as a lifelong Florida shark fisherman, and a huge collector of Jaws, they just jumped off the page at me.
[quoted image]
Wow! Is that the ACTUAL hatchet quint used in the movie?!
Quoted from CRCades:Ok, I’ll give you a look at one of the major parts of the JAWS Custom Detail set early.
I’ll have one for you Pro owners as well!
[quoted image]
now this is what I'm talkin bout!
Been busy at the FlipMods lab! Check out our RGB interactive shark cage + ramp illumination kit! Add some light to the ramps on your Jaws Premium / LE pinball machine, as well as ramps + shark cage on your Jaws Pro! This kit installs inline with your RGB illumination and provides RGB illumination in sync with the GI lights in the game in the dark ramps & shark cage. Our custom built wire harness and mounts are easily installed and are completely interactive. No permanent game modifications are required.
https://flipmods.com/product/jaws-rgb-ramp-shark-cage-illumination-kit/
https://pinside.com/pinball/market/shops/1378-flipmods/10468-jaws-rgb-ramp-amp-shark-cage-illumination-kit-pro-prem-le
20240306_145342arrows.jpg20240306_145350.jpg20240306_152724.jpg20240306_153722.jpg20240306_145313.jpg20240306_145324.jpg20240306_152755.jpg20240306_151356.jpg20240306_152654.jpg20240305_140353.jpgQuoted from HWYSTR455:My premium showed up Monday...sweet....
[quoted image][quoted image]
Nice Judge!
Quoted from HWYSTR455:The Judge is a full-on restomod, 8 year labor of love. Still have some minor clean up stuff to do.
[quoted image][quoted image]
I have another Jaws pinball banner option available in my Pinside store. Custom design if you want something a little different than the standard movie poster. Introductory price of $100, includes free shipping within USA/Canada. Standard 24 x 62 inches with four corner grommets, made from heavy 16 ounce vinyl.
Can be pre-ordered with the link below. Cheers.
Toronto, ON
Added Flipmods custom 3D lane guides and lit North Beach sign today, and wow what a difference. The lane guides are my favorite. The way the light comes through and light the lanterns and the words really make a big difference compared to the stock plastics. They are brighter and look better. The 3D wood look of the north beach jumps out as well. Super easy installs and you can run the wire down by the chum bucket and clip to a GI right there. Only thing I would say is to route the wire behind the gate switch so it doesn’t get caught on the gate or switch. Another quality addition from Flipmod.
Bottom line up front -- if you ordered Rocket City Pinball mods for your Jaws, please PM me if:
- you don't have your game yet and are thereby willing to wait for your parts
- you plan to attend Texas Pinball Festival and wish to pick up your order there
This will help me prioritize order processing.
Details:
First, I want to say thank you all for the overwhelmingly positive response to my Jaws mods!
I shipped large batches of orders last week and early this week, including a whole bunch of Airball Suppressors (feel free to sound off if you received yours, I haven't heard) ... but then I left town for several days on a (day job) business trip. This trip got extended by an entire extra day due to an aircraft avionics system failure on my return flight (thankfully before it left the ground). Now that I'm back home, after work today I can resume order processing.
The other concern, however, is that next weekend is Texas Pinball Festival. Rocket City Pinball will have a booth there, and I'm wanting to bring as much stock with me as I can. I have less than a week to prepare stock while still having a lot of your orders to fulfill.
So, if you're a RCP customer with an outstanding order, you don't have your game yet, and you're willing to wait a little longer for your parts, please send me a PM -- this will help me prioritize who needs parts now to stop airballs in games actively in use. I will do my best to get as many of these out before TPF that I can.
Speaking of TPF, some folks have requested order pickup there -- this is fine also, I just need to know ASAP! If you're attending TPF and want to pick up your parts there, I will put priority on those orders and will refund shipping charges after pickup.
Thanks again everyone, I'll do my best to ship as many orders I as I can before TPF!
Quoted from ShineSpark:Now that I have my new Jaws Prem I've been able to put this wooden Orca model I grabbed off of etsy. Pretty much perfect dimensions for a topper. I'm super happy with it!
[quoted image]
This is one of the best "not made to be a topper" toppers I've seen.
Quoted from Clytor:This is one of the best "not made to be a topper" toppers I've seen.
These are also available on Amazon, but not as large, just a bit smaller. It's going to be part of mine with some other goodies added. Hopefully within a month or so.
Quoted from ShineSpark:Now that I have my new Jaws Prem I've been able to put this wooden Orca model I grabbed off of etsy. Pretty much perfect dimensions for a topper. I'm super happy with it!
[quoted image]
Nice topper. I need to figure out how to put a light in the cabin.
IMG_4166 (resized).jpeg
Promoted items from Pinside Marketplace and Pinside Shops!
Reply
Wanna join the discussion? Please sign in to reply to this topic.
Hey there! Welcome to Pinside!
Donate to PinsideGreat to see you're enjoying Pinside! Did you know Pinside is able to run without any 3rd-party banners or ads, thanks to the support from our visitors? Please consider a donation to Pinside and get anext to your username to show for it! Or better yet, subscribe to Pinside+!
