Haggis Pinball - 2nd game = Fathom + Fathom 2.0 confirmed

Quoted from Zukram:
We reported display issues as well, and have word that there is work being done to correct this, and should have a software patch coming soon. Both for the score/segment displays, and occasional in apron screen blanking/resets..

Yes I have had some occasional apron screen blanking resets. I’d also say the 2.0 code should add a bit more on what to do in each multi-ball. When you start a mermaid battle it doesn’t say what you have to hit and I believe it should light things up red to display this but it’s currently not in there. The health of the mermaids could be reduced some as well, maybe 25%.

#5552 1 year ago

MEJ

Zukram

RPC

Fairport, NY

6y 70,800 526 26 2

Quoted from Pmaino:
Yes I have had some occasional apron screen blanking resets. I’d also say the 2.0 code should add a bit more on what to do in each multi-ball. When you start a mermaid battle it doesn’t say what you have to hit and I believe it should light things up red to display this but it’s currently not in there. The health of the mermaids could be reduced some as well, maybe 25%.

Well that mode is also a bit buggy as far as scoring goes, like draining the ball early in the mode (after ball save) will get you a million points or so.. Completing the mode, if you can, maybe a couple hundred k ..

#5553 1 year ago

PMM

Pmaino

Pinside+ Frequent

Quoted from Zukram:
Folks with a Fathom, can you look to see how the wires to this coil are routed on the large bank of drop targets. Found where I think caused our first short, there was a small spot of insulation worn that somehow we did not see until last night. The wear was just near the lower coil in the picture, maybe where it was ziptied to the mech or possibly had a chance of getting caught by the mech movement itself. Unfortunately I had no other pictures of how it was ziptied or routed, but might be worth a look to see if you might have the same situation.. Our game got quite a few plays the first couple weeks it was on the floor..[quoted image]

Here are a few pictures of mine. Let me know if this helps.

4DC7623F-7146-4A34-9335-982B853EBF29 (resized).jpeg

CA366890-4D51-4EB3-A354-5DB1D477698C (resized).jpeg

DDFE9D9B-6A78-4120-9468-C9DF3FA165A8 (resized).jpeg

#5554 1 year ago

PMM

Pmaino

Pinside+ Frequent

Took some pictures of the apron rules for 2.0 in case anyone was looking for it.

024C1A04-7D0D-4FF2-8997-37FDEF12D700 (resized).jpeg

0CC4A7F7-CD9A-4FE0-858D-86ADAD97377D (resized).jpeg

321B6003-8023-4DAA-8314-A032BF2E5B2F (resized).jpeg

75A21A20-84F4-4677-A0EF-885A29992E67 (resized).jpeg

81320D87-7B41-423B-BDF4-4B786AF04A50 (resized).jpeg

A860BD91-9025-41A0-A624-E35EF1CEB937 (resized).jpeg

D0260B4F-7774-4CA9-86EC-76E474F3F10B (resized).jpeg

DBC8A642-B4F5-4319-A171-217BFA05600E (resized).jpeg

#5555 1 year ago

MEJ

Zukram

RPC

Fairport, NY

6y 70,800 526 26 2

Quoted from Pmaino:
Here are a few pictures of mine. Let me know if this helps.
[quoted image][quoted image][quoted image]

Thank you it does.. I'm pretty certain mine doesnt have the two black plastic tie down things in that area, and the wire was firmly zip tied to the mech itself.. Maybe the vibration of that mech when it resets eventually caused the short. So looks like they changed that sometime after my build to yours..

#5556 1 year ago

LDC

Brk_oth

Aus Pinball Museum

Mount Barker

7y 40,200 79

Quoted from PoMC:
The latest Slam Tilt podcast, Bruce stated they have one at the place and it's been a lot of problems. Fuses blowing and not able to troubleshoot easily without schematics or documentation. Anyone else having any issues at all?

No big issues that kill gameplay or affect coins going in.
A few small bugs in the code that should get sorted out eventually.
Displays constantly go blank during a game.
Lost all sound once - it blew a fuse, hasn't happened again so no clue why. The game wouldn't boot after replacing the fuse, but something must have come loose while in there as after reseating all connectors and fuses it was back to normal....

#5557 1 year ago

PUN

punkin

Pinside+ Frequent

I hope they fix the code to make shot selection easier. It's the one thing i hate about my Celts.

I never know what i'm suppossed to be doing, therefore i never play it, and neither does anyone else here unless they have to in comp.
It's always greeted with groans and comments of i hate that fucking thing, and that's the entire reason.

#5558 1 year ago

PMM

Pmaino

Pinside+ Frequent

Quoted from punkin:
I hope they fix the code to make shot selection easier. It's the one thing i hate about my Celts.
I never know what i'm suppossed to be doing, therefore i never play it, and neither does anyone else here unless they have to in comp.
It's always greeted with groans and comments of i hate that fucking thing, and that's the entire reason.

Agreed. They need to use the inserts to show what to shoot for in certain modes.

#5559 1 year ago

PJF

rai

Pinside member

20y 169K 18,806 34

Quoted from Pmaino:
Agreed. They need to use the inserts to show what to shoot for in certain modes.

That would make sense to me.

#5560 1 year ago

RJB

Rjbdmdmd

Pinside member

7y 57,050 171

paid my balance...... 8 more weeks.

#5561 1 year ago

MAT

chalkup8

Pinside member

Sunshine

12y 72,800 1,134 4 17

Quoted from Rjbdmdmd:
paid my balance...... 8 more weeks.

These games should really start filing out the door now in the three months or so leading up to Christmas.

#5562 1 year ago

ETN

etien

Pinside member

Fontainebleau

6y 48,300 458 16 6

Paid mine too, they told me 8 weeks. Cool.

#5563 1 year ago

NWR

paulbaptiste

Pinside+ Frequent

Danville, IL

4y 128K 2,195 15 17 1

I'll be at 8 weeks this coming Monday. I didn't plan to see it in time, but will be reaching out then for an update. Hopefully a flood of games start showing up. Excited to get mine for sure.

#5564 1 year ago

JGI

John_I

Space Coast Pinball

19y 179K 9,076

Quoted from paulbaptiste:
Hopefully a flood of games start showing up.

Now that they are hitting their stride on production, it would make sense that output ramps up a bit. Hopefully they can maintain enough parts supplied to keep the finished games rolling out! Slowly but surely is infinitely better than not at all. Good luck on your game.

#5565 1 year ago

ABG

Our_Man_in_Oz

Pinside+ Addict

7y 70,550 600 24 38

Quoted from Rjbdmdmd:
paid my balance...... 8 more weeks.

Quoted from etien:
Paid mine too, they told me 8 weeks. Cool.

I'm 3 weeks in now from having paid. Reckon I'll see Bond LE well before Fathom though...

#5566 1 year ago

VTY

Vitty

Pinside+ Pro!

Minnetrista, MN

9y 136K 1,711 4 6

Hate to burst everyone’s bubble but I’m on week 14 now since payment was rendered in full.

#5567 1 year ago

PMM

Pmaino

Pinside+ Frequent

Quoted from Vitty:
Hate to burst everyone’s bubble but I’m on week 14 now since payment was rendered in full.

It took me around 22 so keep the faith. Hopefully it starts improving. The game is amazing so it’s worth the wait.

#5568 1 year ago

MEL

Meldenhut

Pinside member

3y 56,300 138

Played Fathom at Newcastle Pinfest, it’s amazingly beautiful. It’s correct that the photos just don’t to it justice.
Going back today to have another play and take some pictures

#5569 1 year ago

MEL

Meldenhut

Pinside member

3y 56,300 138

Little bloke scored a hat while playing. Go Haggis!

A7DD7CB9-64E6-4BF7-A0D3-EA8DD854DF15 (resized).jpeg

#5570 1 year ago

NWR

paulbaptiste

Pinside+ Frequent

Danville, IL

4y 128K 2,195 15 17 1

Quoted from Meldenhut:
Little bloke scored a hat while playing. Go Haggis!
[quoted image]

That’s awesome! Planting seeds for the future. I hope Haggis can continue to reintroduce classics for the next generation of pinball enthusiasts.

#5571 1 year ago

WES

Screwloose

Pinside member

Taree

16y 64,900 202 27

I also played Fathom today at Newcastle Pinfest & Spinal Tap too

#5572 1 year ago

WES

Screwloose

Pinside member

Taree

16y 64,900 202 27

What a beautiful game. I had seen the prototype before before but this was the first time I played it in person. I'm sure I could have played it for hours. So well made with such a beautiful light show. It just oozes quality. I'm sure everyone who has one on order will love it when they receive it.

This is Fathom I'm talking about...

#5573 1 year ago

YOB

Mancave

Pinside+ Addict

10y 114K 3,301

Quoted from Screwloose:
I also played Fathom today at Newcastle Pinfest & Spinal Tap too

Were the Spinal Tap flippers really as lazy as they looked in a vid i saw?? Heard i few reasons why they might have appeared so but would be interested to hear from someone who actually played it.

#5574 1 year ago

WES

Screwloose

Pinside member

Taree

16y 64,900 202 27

Quoted from Mancave:
Were the Spinal Tap flippers really as lazy as they looked in a vid i saw?? Heard i few reasons why they might have appeared so but would be interested to hear from someone who actually played it.

I haven't seen the video. I can't say they were noticeably lazy. I was making shots ok. Only one of the 2 machines was running

#5575 1 year ago

PUN

punkin

Pinside+ Frequent

I plunged my third ball on Spinal Tap.
It felt like a toy.

Fathom was beautiful. I had one game with the Haggis boys and one with a couple of other guys. The sounds are incredible, the spinner makes a cracker of a noise. The game is as beautiful as Celts and the attention to detail screams.

There is not a better presented pinball that i have seen from any manufacturer.

#5576 1 year ago

PUN

punkin

Pinside+ Frequent

Here's a pic of their 'competition'. Taken at just the right time while the machine was working.

DSCF1430[1] (resized).jpg

#5577 1 year ago

POP

Llabnip1972

Pinside member

3y 55,300 733

I heard the back box screen just plays movie clips with no game info. Laughable

Edit. I never bothered to look at it before but I see it has a dmd and a back box screen? Or is that just a translite?

#5578 1 year ago

JDS

swinks

Swinks Pinball

12y 136K 10,573

Quoted from Llabnip1972:
I heard the back box screen just plays movie clips with no game info. Laughable
Edit. I never bothered to look at it before but I see it has a dmd and a back box screen? Or is that just a translite?

yes, dmd and then lcd for movie clips

#5579 1 year ago

POP

Llabnip1972

Pinside member

3y 55,300 733

Quoted from swinks:
yes, dmd and then lcd for movie clips

#5580 1 year ago

JCB

jkdblaze

Pinside+ Frequent

Houston, TX

11y 67,650 1,124 7 22

Just received my invoice (I'm order #232).

Is anyone doing container shipping? That would be my preference for the $ savings, but don't want to wait an extra six months either. Luckily, I have some time to think about it.

#5581 1 year ago

PJF

rai

Pinside member

20y 169K 18,806 34

Quoted from jkdblaze:
Just received my invoice (I'm order #232).
Is anyone doing container shipping? That would be my preference for the $ savings, but don't want to wait an extra six months either. Luckily, I have some time to think about it.

I'm doing container shipment.

#5582 1 year ago

TAM

Travahontas

Travahontas Mods

Dickinson, TX

3y 72,300 477 2 12

Gotfrogs what’s your number?

#5583 1 year ago

MJA

mjalexan

Pinside+ Frequent

West Lafayette, IN

7y 61,550 348 8 10

Quoted from jkdblaze:
Just received my invoice (I'm order #232).
Is anyone doing container shipping? That would be my preference for the $ savings, but don't want to wait an extra six months either. Luckily, I have some time to think about it.

I’ll probably go ocean, order 105

#5584 1 year ago

JCB

jkdblaze

Pinside+ Frequent

Houston, TX

11y 67,650 1,124 7 22

Quoted from mjalexan:
I’ll probably go ocean, order 105

If you're invoice #105, then I'm a bit surprised to have been billed already at #232. But hopefully it's all good, looking forward to getting this. And USD to AUD seems really good right now.

#5585 1 year ago

PUN

punkin

Pinside+ Frequent

Quoted from jkdblaze:
If you're invoice #105, then I'm a bit surprised to have been billed already at #232. But hopefully it's all good, looking forward to getting this. And USD to AUD seems really good right now.

From that side....

I buy in USD and sell in AUD

#5586 1 year ago

CBW

Gotfrogs

Dickinson, TX

5y 81,300 871 14 1

Quoted from Travahontas:
Gotfrogs what’s your number?

My machine number is 242 but my order/invoice number was 336 (I assume out of all Haggis sales to date). I have no idea where this puts me in line but I would guess near the way back!

#5587 1 year ago

???

Pinchild

Pinside member

Eagle, ID

5y 54,800 739 12 44

Quoted from jkdblaze:
Just received my invoice (I'm order #232).
Is anyone doing container shipping? That would be my preference for the $ savings, but don't want to wait an extra six months either. Luckily, I have some time to think about it.

I'm doing container

#5588 1 year ago

JCB

jkdblaze

Pinside+ Frequent

Houston, TX

11y 67,650 1,124 7 22

Email from Haggis mentioned a 40' container, so if my math is right that's a max of 45 boxed pins (hope it's less). I'll have to ask them when my machine is ready, how many are reserved for a container, and make a decision then.

1 week later

#5589 1 year ago

???

Pinchild

Pinside member

Eagle, ID

5y 54,800 739 12 44

Received my payoff notification this morning.

Staying with container option.

#5590 1 year ago

BBB

oldskool1969

Pinside member

Gilligan's Island

10y 134K 3,652 12

Quoted from Pinchild:
Received my payoff notification this morning.
Staying with container option.

The smart option IMO
You are one step closer than me so enjoy the ride

#5591 1 year ago

JGD

mkintaiwan

Pinside member

Gardena, CA

2y 25,050 19 8

Anyone pulling out - let me know - I’m keen!

#5592 1 year ago

MAT

chalkup8

Pinside member

Sunshine

12y 72,800 1,134 4 17

Where are the proud new owners ? Nothing but tumbleweeds and crickets at the moment.

#5593 1 year ago

CRC

rodcom

DPC

17y 94,050 241 29 50 1

Meant to add these earlier from last weekends Super Awesome Tailgate at Cointaker BubbaBeast

2DAA9050-8810-48F3-AC6F-77EB3B4AD8A6 (resized).jpeg

4D155A47-8884-4C2E-AB73-D449B8C304BF (resized).jpeg

9015EFA0-3043-4145-8881-01AE3BF66E93 (resized).jpeg

A5E8F484-3EE8-4FA3-B8A1-1E4004D742AB (resized).jpeg

#5594 1 year ago

MAT

chalkup8

Pinside member

Sunshine

12y 72,800 1,134 4 17

Quoted from rodcom:
Meant to add these earlier from last weekends Super Awesome Tailgate at Cointaker

Alright !! nice to see.

#5595 1 year ago

PUN

punkin

Pinside+ Frequent