Not having had any system 80 or any Gottlieb’s for that matter this is all new to me. I picked up a Jacks to Open nonworking in really nice shape otherwise. Owner was a non pinball person and had it since 90’s. He didn’t know how to get inside lol! After cleaning connectors and replacing power supply, it boots up fine. Here’s the issues:
1. Won’t coin up. Tried adding credits, checked connector, coin mech switches are good and slam switch is closed. Believing it may be MPU issues as it did have a non-original battery which was loooing funky so I pulled it. It’s still off. Not sure if that matters. Note there’s a lifted trace that was like that with battery connected on the + side.
2. Bottom two displays are working but none of the top segments of either are working. Seems really odd even in test unless that’s normal? Really odd to have both like that and all of them that way. Are they supposed to be working or where should I be looking if not?
I’m planning to go with a new CPU board as this one looks a bit ugly. Anything else I should be doing? The lower cabinet power supply has the spade style ground connectors. One was broken so I replaced that one.
0AAA22A9-11BD-4352-B5A4-6CAC21D55C4A (resized).jpeg8C90B582-3869-4584-B224-64D75EB8BE1E (resized).jpegF425B5FE-C038-4402-8748-5398DA1015D7 (resized).jpeg9057C3BC-B99C-46AE-81B1-99278D1C89CE (resized).jpeg7EB92A50-7F53-46C8-BBC6-A128D246D897 (resized).jpegB4F35DC2-4DF4-4E1D-B346-CA951A72ADE7 (resized).jpegA0F13809-1020-4F66-A412-259D0640E7FF (resized).jpegB36A5E1C-717C-4DD6-9339-21F0AF670D73 (resized).jpegA38AA113-0774-42BF-8337-4EF3AA00E8FE (resized).jpeg