Ok first I would like to thank everyone for their help this forum has been great. I have finally put everything back together on my Monday Night Football last night. I rebuilt the flippers last night and then turned it on for a few games and the coils were smoking. I got advice from the forum and found the EOS were not opening so I fixed the gaps.
Then I started playing again with no problems until I set a high score. It asked me to type in my initials but the letters werent changing when I hit the flippers. So I turned off the machine and found the the last contact on the flippers werent being hit. So I fixed the gap on that. Now when I turn on the machine I hit start and the machine says it is missing balls. I checked they are all there. And when I went into the menus and found a place to check the typing that doesnt work either even with the connection being make.
I ran a switch test and nothing is wrong there. Is it possible I shorted something out? And if I did what How do I track that. I checked all the fuses and everyhing looks fine.
The only weird thing that happened was when I worked on the michine prior I was unplugging it. Tha last time I just turned it off and when I went to touch the prong it zapped me a little. I take it that could be the short. I have no clue.

Well and I also just checked it doesnt register the flippers for changing the letteres again even though it is hittling the sensor.