Posting this here to link my shop with this mod I am selling and to post extra pics. I made this because I didn’t like the flat plastic and wanted a glowing orb. I hav seen a few but they were bubbly and I wanted a nice clear one so this is what I came up with.

https://pinside.com/pinball/market/shops/1172-hdmike-mods/02221-iron-maiden-orb-mod

1C2CDDB8-239D-406F-90BA-6713E0918194 (resized).jpeg29616C21-9B23-4A31-9EDF-6060B41619D2 (resized).jpeg2DA057FC-9728-4C82-B19C-01E0C6D10F6D (resized).jpeg32921A01-4009-4A7E-9545-4BF0526B1DDA (resized).jpeg951C02C5-D1E0-492D-A2F4-B1269C42170B (resized).jpeg9A226949-0BF5-43E1-A174-8D17BA42A364 (resized).jpegA26F20C8-7A76-4AF1-A165-B10F2652587C (resized).jpegABA150EC-D73B-47B1-9972-11087B8F3137 (resized).jpegE355DF41-5552-4CBE-BB54-0E4EBFBB3B17 (resized).jpeg

This should work on a pro as well but I don’t have one to check as of yet.

Does anyone with a pro know if the led under the plastic is the similar led chip board? Also what color is it

No I use the existing factory led and flip it over to light up through the plastic and illuminate the orb. The light facing downward before was just ok in my opinion but facing up through the orb really shines.
Thx for the pic. Does your orb plastic have a number on it? I’m curious if they are the same on the pro and premium/LE.

Sorry I meant the clairvoyant plastic. I only ask because a few plastics are different on the two styles

Thx Adam!

The number is right on the top it doesn’t need to be removed. It is very small

Great thx, that means the orb will fit and work on the pro but the light will only be the single color. Is the pro just a white light?

Yes first is 3/4 second is 1”

Ok thx

I’ll sell one to someone with a pro for $15 if they will send me some pics or post it. I would like to see what it looks like and a few people have asked.
First to post here and I’ll pm you

I’ll find mine and post it

.
https://www.dropbox.com/s/3e0jwj1dzvowmcs/Video%20Jan%2018%2C%207%2029%2054%20PM.mp4?dl=0

Here is the video

Thx! I appreciate the kind words.

Just a note on this also, I now will be sending one appropriately sized nylon spacer instead of three that are thinner and need to be stacked. I finally found a source.

Got someone thx

I actually had to diffuse the light in a little bit because it was too bright

Looks great on the pro, thx for putting up the pics!!

That’s the 1”

If it affects the color too much and you don’t like it you could drill a hole right where the LED is and then you will still get the natural color of your Led

And thanks for your order !!

Thanks! Looks great!!

Thanks.. lookin good!!

To all you pro owners I have figured out a way to add colors to the orb for the white led. I will be posting color pics in a few weeks ( once I get my hands on a pro to get actual test pics). The price will be the same and if anyone who already bought an orb wants to add color I’ll send the colored vinyl I’m using for free once I have the colors nailed down.
Looking like yellow, reddish orange, blue, purple, a teal green I think, and possibly pink.

I’ll keep updates here

Looks good, that is along the lines of the colors I’m working on, hope to test this week. Good to know about the plastic protectors, I’ll add a couple thin nylon washers as well from now on for those with protectors.

I had that problem in the beginning and just tightened it more and it’s never moved again
Still working on colors for the pro models
Did some testing last night