(Topic ID: 215735)

Iron Maiden Mod Thread


By Lermods

12 months ago



Topic Stats

  • 795 posts
  • 161 Pinsiders participating
  • Latest reply 16 hours ago by vireland
  • Topic is favorited by 108 Pinsiders

You

Topic Gallery

There have been 468 images uploaded to this topic. (View topic image gallery).

A1095B4D-E0A0-4671-9333-4DDA314EC61C (resized).jpeg
F859BD88-4AC3-4D21-BA50-B86B1D8408B4 (resized).jpeg
3F8FE2CB-1127-4075-871A-BC00FE67B88E (resized).jpeg
8E380A50-9916-4B97-A1CC-D375D3CBAF38 (resized).jpeg
20190412_152928 (resized).jpg
IMG_5388 (resized).JPG
IMG_5425 (resized).JPG
IMG_5426 (resized).JPG
IMG_5427 (resized).JPG
IMG_5430 (resized).JPG
IMG_5431 (resized).JPG
IMG_5433 (resized).JPG
IMG_5437 (resized).JPG
IMG_5443 (resized).JPG
IMG_5445 (resized).JPG
IMG_5447 (resized).JPG

There are 795 posts in this topic. You are on page 6 of 16.
16
#251 9 months ago

Just released 2 new mods for the game

Full size guard works on Pro models only, unless you want to mount him in a different location.
The half guard works with all models.
Tons more in the works. Hope everyone likes

IMG_1944 (resized).JPGIMG_1945 (resized).JPGIMG_1949 (resized).jpgIMG_1950 (resized).JPGIMG_1960 (resized).JPGIMG_1963 (resized).JPGIMG_1964 (resized).JPG

#252 9 months ago

R they on your site

#253 8 months ago

Added German plane getting chased by the spitfire and the usual mods already mentioned

20105DDB-B193-4002-8221-1EB8060E92FE (resized).jpeg6C005732-6AFD-423C-B0E3-E6F408AE0EB2 (resized).jpeg873C78F4-08F9-4BFF-9383-65A12452481E (resized).jpegA36194D7-6CC7-47A1-8C51-1EB9DE962404 (resized).jpegC14363FB-8646-4070-A318-74C6BE249AAE (resized).jpegFAC2F48C-64AD-485C-8B55-90306BD3FA7A (resized).jpeg
#254 8 months ago
Quoted from Sako-TRG:

Added German plane getting chased by the spitfire and the usual mods already mentioned
[quoted image][quoted image][quoted image][quoted image][quoted image][quoted image]

Looks great!!

#255 8 months ago
Quoted from BackAlleyMatt:

Just released 2 new mods for the game
Full size guard works on Pro models only, unless you want to mount him in a different location.
The half guard works with all models.
Tons more in the works. Hope everyone likes
[quoted image][quoted image][quoted image][quoted image][quoted image][quoted image][quoted image]

Matt.... If youcan make one the same size as the plastic that works on the Prem. I would defiantly like one.

#256 8 months ago

Some trooper Ale and beer Keg to drink whilst playing

C525168C-2DC8-4A6C-A274-A48E0F1BB38C (resized).jpeg
#257 8 months ago
Quoted from Sako-TRG:

Some trooper Ale and beer Keg to drink whilst playing
[quoted image]

Where do you get that beer at lol? Man i need some of that on hand for when i get my game next week. Love the Bobbleheads also!!

#258 8 months ago
Quoted from Who-Dey:

Where do you get that beer at lol? Man i need some of that on hand for when i get my game next week. Love the Bobbleheads also!!

You can get the Trooper ale (bottles or cans) here in the States at places like BevMo, Total Wine, etc., but I have not been able to find the cool mini kegs.

#259 8 months ago

Cut some truecolor protectors for my maiden. Finally a game flourescent yellow looks awesome on! I also removed the lower inlane metal and cut a clear plastic for it. Lets a lot more light through and doesn't block any art

20180730_113835 (resized).jpg20180730_113842 (resized).jpg
#260 8 months ago
Quoted from jrivelli:

Cut some truecolor protectors for my maiden. Finally a game flourescent yellow looks awesome on! I also removed the lower inlane metal and cut a clear plastic for it. Lets a lot more light through and doesn't block any art
[quoted image][quoted image]

This is one of the best mods I've seen for Maiden. removing the metal outlane also a great idea. Any thoughts on selling sets?

#261 8 months ago
Quoted from hoby1:

Matt.... If youcan make one the same size as the plastic that works on the Prem. I would defiantly like one.

Yep. I'd be all over that also. I guess the current one won't work because it's too big and would hit the top of the machine when the gate opens?

#262 8 months ago

The Killers NECA figure fits a treat where the plastic Somewhere In Time plastic is located, was worried that it wouldn’t clear glass but it does with ease and doesn’t look too big.
Got all 3 figures now

3625CC5E-E88F-4E20-BE17-600C0BE18102 (resized).jpegA28C4ABA-3FAC-464D-A734-5BF8CC6869FE (resized).jpegB807AD56-4DB9-49CB-B899-CB4C99BF18D7 (resized).jpegD7242F21-83E3-483E-8BE6-E21E99D08A25 (resized).jpeg
#263 8 months ago

Maiden powerblades are in house and ready to ship
https://www.youtube.com/channel/UCp1eeMO151NE3XZTqvLC2mA

529D29C6-D579-4F87-8C0B-BC2DF430CDD2 (resized).jpeg
#264 8 months ago
Quoted from Sako-TRG:

The Killers NECA figure fits a treat where the plastic Somewhere In Time plastic is located, was worried that it wouldn’t clear glass but it does with ease and doesn’t look too big.
Got all 3 figures now
[quoted image][quoted image][quoted image][quoted image]

Does the Killers figure still have his lower body intact? It almost looks like it is cut from waist down.

#265 8 months ago
Quoted from chuckcasey:

This is one of the best mods I've seen for Maiden. removing the metal outlane also a great idea. Any thoughts on selling sets?

Thanks! I made a posting here https://pinside.com/pinball/forum/topic/iron-maiden-truecolor-plastic-protectors#post-4517488

Sorry been away for a bit here, Fell and broke my orbital bone so been off comp last several days. Still cant see very well but can do things now. $35 shipped anywhere us for 6 piece set

#266 8 months ago

I've fitted my Pro with kick-ass pinblades from Pingraffix, really nice and colorful

Oh, btw, where do I get these figures??? Piece of mind and The Trooper looks awesome, I'm sure my answer is in this thread somewhere, but I havent read all the posts, just looking at pick

38644322_1975487772743398_2584447856848928768_n (resized).jpg38670926_431961717312186_2042515914301112320_n (resized).jpg38729539_437971020044300_388330979896328192_n (resized).jpg38734815_210658753126828_4683932749940129792_n (resized).jpg38735939_313047432596343_4251930143146115072_n (resized).jpg38736469_293329254764830_1047354730344349696_n (resized).jpg38810437_929140443938783_4190170270071259136_n (resized).jpg
#267 8 months ago
Quoted from DrMark12PA:

Does the Killers figure still have his lower body intact? It almost looks like it is cut from waist down.

Hi There,

All in tact, it fits with zero issues. I removed the plastic Eddie and kept the metal bracket and small black cable tie around his leg. Keeps it solid with no movement.
The figure actually appears smaller than expected due to the infrastructure around him

#268 8 months ago
Quoted from gearhead:

Yep. I'd be all over that also. I guess the current one won't work because it's too big and would hit the top of the machine when the gate opens?

I’d LOVE one of these that would fit my LE!

#269 8 months ago
Quoted from F348:

I've fitted my Pro with kick-ass pinblades from Pingraffix, really nice and colorful
Oh, btw, where do I get these figures??? Piece of mind and The Trooper looks awesome, I'm sure my answer is in this thread somewhere, but I havent read all the posts, just looking at pick
[quoted image][quoted image][quoted image][quoted image][quoted image][quoted image][quoted image]

Those look pretty awesome.

I have a premium (I chose the model mainly because I love the Egyptian artwork). I am hoping someone comes up with some blades that extend the 'tomb' artwork on the back around the rest of the cabinet. So far the closest thing I saw was a bunch of hieroglyphics, but I'm hoping there is something closer to the stone block pattern around the tomb guard area.

#271 8 months ago
Quoted from hoby1:

Matt.... If youcan make one the same size as the plastic that works on the Prem. I would defiantly like one.

By what I was told from a few people that have the premium it would not fit. If i make it the same out line of the plastic it fits but I was told that if it is thicker then the plastic piece it would not work. I guess the wood piece just above the head of the plastic would hit it when it raises up for the ball to enter. I would totally be up for making it the same size but if it can only be as thick as the plastic LMK if you see anything different, I only have the Pro at my shop.

#272 8 months ago
Quoted from BackAlleyMatt:

By what I was told from a few people that have the premium it would not fit. If i make it the same out line of the plastic it fits but I was told that if it is thicker then the plastic piece it would not work. I guess the wood piece just above the head of the plastic would hit it when it raises up for the ball to enter. I would totally be up for making it the same size but if it can only be as thick as the plastic LMK if you see anything different, I only have the Pro at my shop.

Just installed on my pro, jeez man this looks great and fits so well! Thanks again for another quality creation!

Iron Maiden: Legacy of the Beast (Pro) is quickly becoming my most modded machine

#273 8 months ago

I added chains & kept them all on the same plastic piece. 2 screws removes the whole thing for easy access. Also added a lamp to light it up.

20180811_204428 (resized).jpg20180811_204440 (resized).jpg20180811_204500 (resized).jpg
#274 8 months ago

I like the chain, where did you get it? I had dog tag chain sitting around so I used it. Yours looks 100 times cooler! I ran 2 of mine over the ramp and the pops and balls will make them move. It's a nice effect...

#275 8 months ago

...and did you screw eye bolts into your plastic and his neck?

#276 8 months ago

...Cliffy's available yet? What are ppl doing for the under ramp scoop at all? Same with the shooter lane?

#277 8 months ago
Quoted from jardine:

...Cliffy's available yet? What are ppl doing for the under ramp scoop at all? Same with the shooter lane?

Shooter lane is available, I think you’ll have to email him for it.

#278 8 months ago
Quoted from jardine:

...Cliffy's available yet? What are ppl doing for the under ramp scoop at all? Same with the shooter lane?

All of them are on his site now.

#279 8 months ago

Cheers guys..sent an email for the set. Didn't see them last time I was there like a week ago! Not sure why you'd need one behind the drops targets?? Any reason for that at all.

#280 8 months ago

It’s under the New Stuff tab on Cliffy’s website. There a good amount of stuff on there for IMDE

#281 8 months ago
Quoted from jardine:

Cheers guys..sent an email for the set. Didn't see them last time I was there like a week ago! Not sure why you'd need one behind the drops targets?? Any reason for that at all.

I have the Cliffy set minus the under ramp scoop (I own a Pro). I wondered the same thing about the drop target area protector at first. But after taking the plastic covering the area you can see just how that inside lip could take a bashing when any of the drop targets are down.

Be aware, installation is very tight. The protector winds up being held down by several posts it goes under. There is a tiny hole in the bottom of the protector which I initially thought would be for a small screw to be installed to hold it in place. However it is not, it is way to close to the edge of the wood lip to add even a small screw. The protector ends up fitting perfectly secure.

#282 8 months ago

First draft of my homemade blades, what do you think?

20180815_141846.jpg20180815_141903.jpg
#283 8 months ago

Very nice looking

#284 8 months ago
Quoted from jardine:...Cliffy's available yet? What are ppl doing for the under ramp scoop at all? Same with the shooter lane?

The drop down targets protector should go in the back on the targets not the front as I indicated in the video. Easy to switch

#285 8 months ago
Quoted from wiggy07:

The drop down targets protector should go in the back on the targets not the front as I indicated in the video. Easy to switch

#286 8 months ago

Here's the 2nd and maybe final version. I'm happy to share the file if anyone wants it.

20180816_161903.jpg20180816_161918.jpg
#287 8 months ago
Quoted from Vader77:

Here's the 2nd and maybe final version. I'm happy to share the file if anyone wants it. [quoted image][quoted image]

This is the side art I would prefer the most with the different versions of Ed over the years. I still think Stern dropped the ball on the art in this game to not include more visions of Ed and cheap figurines that have prompted most owners to buy their own figures. Unfortunately, I'm sure licensing comes into play when producing the art though Stern could easily have produced some side art with approval from Iron Maiden that would be this good.

#288 8 months ago

I just finished printing another batch of the Iron Maiden clairvoyant ORB mod. "They're back in stock" in you're interested.
Still only $20 (includes shipping)

PM me or visit my Pinside shop:
https://pinside.com/pinball/market/shops/1158-3d-mods/01789-iron-maiden-orb-mod-3d-printed

ORB 1 (resized).jpgORB 2 (resized).jpg Added 8 months ago:

(Not $45 like others) - and its the OG.

#289 8 months ago

I’m not sure I ever updated this, but we now have two versions of the plane. Both have under glow lights to light the play field below, but one has static wing lights that are always on and a second version has interactive wing lights that tie into the flasher on the right side of the playfield.

https://lermods.com/products/iron-maiden-pro-pinball-illuminated-plane-mod

And of course many other mods for this gam, include a pro version of an orb, which ties directly To the orb insert and takes the place of the flasher and a version for the le and premium that is static with a color changing bulb always on with the GI.

https://lermods.com/products/iron-maiden-pinball-illuminated-orb-mod

1 week later
#290 7 months ago

I wanted to thank James (JRIVELLI) for the super cool Iron Maiden colored plastic set.

Easy to install. The colored plastic protectors are not what you expect, they’re better - he was a genius and cut out the middles so the yellow would not change the color of the art on the plastic !! Wish I would have taken picture before hand. Next, he supplied me with clear plastics to replace the metal inlane guides which lets about 300% more light thru since the metal is no longer blocking the lights.

Thanks James and great job !!

image (resized).jpg
#291 7 months ago
Quoted from chuckcasey:

Easy to install. The colored plastic protectors are not what you expect, they’re better - he was a genius and cut out the middles so the yellow would not change the color of the art on the plastic !!

I was considering getting these, but was concerned about the red light (LE\Premium) under the yellow. I guess since the center is cut out, then that's not going to be as big an issue. Has anyone with an LE\Premium put these in?

#292 7 months ago
Quoted from chuckcasey:

I wanted to thank James (JRIVELLI) for the super cool Iron Maiden colored plastic set.
Easy to install. The colored plastic protectors are not what you expect, they’re better - he was a genius and cut out the middles so the yellow would not change the color of the art on the plastic !! Wish I would have taken picture before hand. Next, he supplied me with clear plastics to replace the metal inlane guides which lets about 300% more light thru since the metal is no longer blocking the lights.
Thanks James and great job !!
[quoted image]

That’s awesome. Ordering now.

#293 7 months ago
Quoted from chuckcasey:

I wanted to thank James (JRIVELLI) for the super cool Iron Maiden colored plastic set.
Easy to install. The colored plastic protectors are not what you expect, they’re better - he was a genius and cut out the middles so the yellow would not change the color of the art on the plastic !! Wish I would have taken picture before hand. Next, he supplied me with clear plastics to replace the metal inlane guides which lets about 300% more light thru since the metal is no longer blocking the lights.
Thanks James and great job !!
[quoted image]

Thanks for the kind words. Glad you like them!

#294 7 months ago
Quoted from bigdaddy07:

I was considering getting these, but was concerned about the red light (LE\Premium) under the yellow. I guess since the center is cut out, then that's not going to be as big an issue. Has anyone with an LE\Premium put these in?

Was wondering then same thing.... hopefully someone will chime in

15
#295 7 months ago

I wasn't crazy about the white LEDs so I added some matching lighting gel. Purists and puke fighters can hate away, I like it... tones it down a lot! Looks better in person than in the pic
Also really happy with swapping red for purple in slings.

20180816_172447 (resized).jpg20180906_134306 (resized).jpg
#296 7 months ago

very nice

#297 7 months ago
Quoted from Vader77:

I wasn't crazy about the white LEDs so I added some matching lighting gel. Purists and puke fighters can hate away, I like it... tones it down a lot! Looks better in person than in the pic
Also really happy with swapping red for purple in slings.
[quoted image][quoted image]

Looks good!

#299 7 months ago

good idea, I like it as well!

#300 7 months ago
Quoted from bigdaddy07:

I was considering getting these, but was concerned about the red light (LE\Premium) under the yellow. I guess since the center is cut out, then that's not going to be as big an issue. Has anyone with an LE\Premium put these in?

They look great on my premium. Thanks again James!

Promoted items from the Pinside Marketplace
From: $ 129.95
Lighting - Interactive
Hookedonpinball.com
Wanted
Machine - Wanted
Jacksonville, NC
$ 7,499.00
Pinball Machine
Gulf Coast Pinball, LLC
$ 24.95
Playfield - Toys/Add-ons
ULEKstore
$ 16.50
Lighting - Led
Lermods
$ 5,799.00
Pinball Machine
Gulf Coast Pinball, LLC
Wanted
Machine - Wanted
White Hall, IL
$ 15.00
Lighting - Led
3D MODS
4,950
Sale Pending!
West Bloomfield Township, MI
$ 20.00
Playfield - Toys/Add-ons
3D MODS
$ 39.95
Playfield - Toys/Add-ons
ULEKstore
$ 25.00
Cabinet - Other
Filament Printing
$ 24.50
$ 24.00
Playfield - Other
Pin Monk
$ 24.00
Playfield - Other
Pin Monk
$ 18.95
$ 18.95
From: $ 40.00
Cabinet - Other
Rock Custom Pinball
$ 79.95
Playfield - Toys/Add-ons
Hookedonpinball.com
Wanted
$ 7,499.00
Pinball Machine
Classic Game Rooms
From: $ 34.00
Playfield - Toys/Add-ons
Hdmike mods
$ 10.00
Cabinet - Sound/Speakers
Gweem's Mods
There are 795 posts in this topic. You are on page 6 of 16.

Hey there! Got a moment?

Great to see you're enjoying Pinside! Did you know Pinside is able to run thanks to donations from our visitors? Please donate to Pinside, support the site and get anext to your username to show for it! Donate to Pinside