Hey guys... first time posting... first time pinball owner (premium), looked over whole thread and couldnt find an answer, so any help will be greatly appreciated. The metal ramp that goes up and down (dont know official name) seems to be misaligned, that is, its too far to right (when looking at it from flippers) and when ramp is down it is resting on or very close to the washer under the black rubber bumper. And when up almost or is riding on black rubber post... im posting pic.. hopefully it will go thru.. any idea how to re-align? i did take all 3 machine screws off, tried to re-align when tightening, but it fell right back to same position. Thanx in advance any detail fix would be appreciated, im not up on all terminology...green pea status!!
maiden (resized).JPGmaiden2 (resized).JPGmaiden3 (resized).JPG