Hold the left flipper button while it's auto plunging. Problem solved. Anything else I can help with?
You're currently viewing posts by Pinsider gliebig.
Click here to go back to viewing the entire thread.
Hold the left flipper button while it's auto plunging. Problem solved. Anything else I can help with?
My pro used to plunge perfectly when going for the upper super skill shot. It now mostly hits the post below the little flipper. Auto-plunger works perfect. Could my spring just be a bit worn out?
Quoted from Rdoyle1978:What's everybody doing as far as their pitch on the game?
I bought one a few months ago and the legs were set to about a 7.3 pitch. The game was hard as hell, but it seemed pretty well dialed in. It's a bit *too* hard for me, so I just pulled it back down to 6.5, and now everything is all crazy! Shots are not returning to the flippers properly, I'm getting tons of drains. Some of it is just me getting used to the new pitch and speed, but it seems excessively floaty. Just curious what's a good setting. thanks!
Mine was dialed in then my dumbass used the pinball leveler app and now its all wonky. I have balls flying off the right ramp.
Quoted from Mancave:I have more trouble with the manual plunge, the auto plunge works 9 times out of 10 from factory.
Same, although my manual used to work. It now hits the post. What is the shim mod? Is that for the manual plunge? Could my spring have just gotten a bit worn?
You're currently viewing posts by Pinsider gliebig.
Click here to go back to viewing the entire thread.
Wanna join the discussion? Please sign in to reply to this topic.
Great to see you're enjoying Pinside! Did you know Pinside is able to run without any 3rd-party banners or ads, thanks to the support from our visitors? Please consider a donation to Pinside and get anext to your username to show for it! Or better yet, subscribe to Pinside+!
This page was printed from https://pinside.com/pinball/forum/topic/iron-maiden-issues?tu=gliebig and we tried optimising it for printing. Some page elements may have been deliberately hidden.
Scan the QR code on the left to jump to the URL this document was printed from.